Skip to content

arm64: qcom: sa8155-adp: enable the high-speed UART for GNSS

Bartosz Golaszewski linux-arm-msm linux-devicetree lkml 1 version Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: sm8150: add the QUPv3 high-speed UART nodearch/arm64/boot/dts/qcom/sm8150.dtsi+21 -00 replies
2/2arm64: dts: qcom: sa8155p-adp: enable the GNSS high-speed UARTarch/arm64/boot/dts/qcom/sa8155p-adp.dts+5 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] arm64: qcom: sa8155-adp: enable the high-speed UART for GNSS

From: Bartosz Golaszewski <[email protected]>

Add the relevant QUPv3 node to SoC dtsi and enable it in the board dts for sa8155p-adp.

Bartosz Golaszewski (2):
arm64: dts: sm8150: add the QUPv3 high-speed UART node
arm64: dts: qcom: sa8155p-adp: enable the GNSS high-speed UART

 arch/arm64/boot/dts/qcom/sa8155p-adp.dts |  5 +++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi     | 21 +++++++++++++++++++++
 2 files changed, 26 insertions(+)
Signature · 1 line
2.37.2

Read the cover letter in its thread