Skip to content

rtl8226b/8221b add C45 instances and SerDes switching

Eric Woudstra netdev 4 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (main)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest6 patches 2 repliesApplied 6/6
  2. v36 patches 7 repliesSuperseded
  3. v27 patches 7 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v1 RFC6 patches11 repliesSuperseded

Changes in v4 from the cover letter

* Changed switch to if statement in rtl822xb_get_rate_matching()
* Removed setting ETHTOOL_LINK_MODE_MII_BIT in rtl822x_c45_get_features()

Patches in v4 All 6 applied

#Subject and filesSizeRepliesApplied
1/6net: phy: realtek: configure SerDes mode for rtl822xb PHYsdrivers/net/phy/realtek.c+110 -41 replyApplied
2/6net: phy: realtek: add get_rate_matching() for rtl822xb PHYsdrivers/net/phy/realtek.c+25 -00 repliesApplied
3/6net: phy: realtek: Add driver instances for rtl8221b via Clause 45drivers/net/phy/realtek.c+131 -40 repliesApplied
4/6net: phy: realtek: Change rtlgen_get_speed() to rtlgen_decode_speed()drivers/net/phy/realtek.c+25 -210 repliesApplied
5/6net: phy: realtek: add rtl822x_c45_get_features() to set supported portdrivers/net/phy/realtek.c+10 -01 replyApplied
6/6net: sfp: add quirk for another multigig RollBall transceiverdrivers/net/phy/sfp.c+1 -00 repliesApplied

Reviews trailers per patch

5 of 6 patches have a Reviewed-by or Acked-by.

PatchRussell King (Oracle)Andrew Lunn
1/6R-b
2/6
3/6R-b
4/6R-b
5/6R-b
6/6R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 net-next 0/6] rtl8226b/8221b add C45 instances and SerDes switching

Based on the comments in [PATCH net-next]
"Realtek RTL822x PHY rework to c45 and SerDes interface switching"

Adds SerDes switching interface between 2500base-x and sgmii for rtl8221b and rtl8226b.

Add get_rate_matching() for rtl8226b and rtl8221b, reading the serdes mode from phy.

Driver instances are added for rtl8226b and rtl8221b for Clause 45 access only. The existing code is not touched, they use newly added functions. They also use the same rtl822xb_config_init() and rtl822xb_get_rate_matching() as these functions also can be used for direct Clause 45 access. Also Adds definition of MMC 31 registers, which cannot be used through C45-over-C22, only when phydev->is_c45 is set.

Change rtlgen_get_speed() so the register value is passed as argument. Using Clause 45 access, this value is retrieved differently. Rename it to rtlgen_decode_speed() and add a call to it in rtl822x_c45_read_status().

Add rtl822x_c45_get_features() to set supported port for rtl8221b.

Then 1 quirk is added for sfp modules known to have a rtl8221b behind RollBall, Clause 45 only, protocol.

Changed in PATCH v4:
* Changed switch to if statement in rtl822xb_get_rate_matching()
* Removed setting ETHTOOL_LINK_MODE_MII_BIT in rtl822x_c45_get_features()

Changed in PATCH v3:
* Only apply to rtl8221b and rtl8226b phy's
* Set phydev->rate_matching in .config_init()
* Removed OEM SFP fixup for now, as there are modules with the same vendor name/PN, but with different PHY's. We found rtl8221b, but also the ty8821, which is not yet supported.

Changed in PATCH v2:
* Set author to Marek for the commit of the new C45 instances
* Separate commit for setting supported ports
* Renamed rtlgen_get_speed to rtlgen_decode_speed
* Always fill in possible interfaces
* Renamed sfp_fixup_oem_2_5g to sfp_fixup_oem_2_5gbaset
* Only update phydev->interface when link is up

Alexander Couzens (1):
net: phy: realtek: configure SerDes mode for rtl822xb PHYs

Eric Woudstra (3):
net: phy: realtek: add get_rate_matching() for rtl822xb PHYs
net: phy: realtek: Change rtlgen_get_speed() to rtlgen_decode_speed()
net: phy: realtek: add rtl822x_c45_get_features() to set supported
port

Marek Behún (2):
net: phy: realtek: Add driver instances for rtl8221b via Clause 45
net: sfp: add quirk for another multigig RollBall transceiver

 drivers/net/phy/realtek.c | 324 +++++++++++++++++++++++++++++++++++---
 drivers/net/phy/sfp.c     |   1 +
 2 files changed, 299 insertions(+), 26 deletions(-)
Signature · 1 line
2.42.1