Skip to content

Secure Boot Advanced Targeting (SBAT) support on powerpc

Sudhakar Kuppusamy via Grub-devel grub-devel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest2 patches 0 repliesNew

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2mkimage: create new ELF Note for SBATinclude/grub/util/mkimage.h util/grub-mkimagexx.c util/mkimage.c+54 -60 replies
2/2mkimage: adding sbat metadata into sbat ELF Note on powerpcutil/mkimage.c+10 -20 replies

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by.

PatchDaniel Axtens
1/2Co-authored-by
2/2Co-authored-by

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] Secure Boot Advanced Targeting (SBAT) support on powerpc

In powerpc, PE format Binary are not supported and can't use shim (https://github.com/rhboot/shim/blob/main/SBAT.md).
However, ELF binary are supported. So, we created new ELF note for SBAT in ELF binary which store the SBAT data and SBAT verifier will be there in firmware to read SBAT data from ELF note and validate it.

this patch series consists of 2 parts:

1) Patch 1: create new ELF Note for SBAT

In order to store the SBAT data, we create a new ELF note. The string "Secure-Boot-Advanced-Targeting", zero-padded to 4 byte alignment, shall be entered in the name field. The string "sbat"'s ASCII values, 0x41536967, should be entered in the type field.

2) Patch 2: adding sbat metadata into sbat ELF Note

The SBAT metadata, which is read from .csv file and transformed into an ELF note, is made into an image using the -s option.

(The rest of this cover letter concerns testing the entire end-to-end setup - SBAT.)

You can experiement with this using entirely free software.

You need the following trees:

https://github.com/SudhakarKuppusamy1/qemu branch sbat
https://github.com/SudhakarKuppusamy1/SLOF branch sbat
https://github.com/SudhakarKuppusamy1/grub branch sbat

You also need:
- the SBAT metadata (.csv file)
- the SBAT Variable (.csv file)
Both should followed the SBAT specification (https://github.com/rhboot/shim/blob/main/SBAT.md)

Example: https://github.com/SudhakarKuppusamy1/testing/sbat

sbat_metadata.csv
sbat_var.csv

Lastly you will need a working a ppc64(le) vm.

sample vm: https://github.com/SudhakarKuppusamy1/testing/vm

pseries-ubuntu-20.04.6.qcow2

Then:

- build qemu (./configure --target-list=ppc64-softmmu && make). You need qemu-system-ppc64.

- use xxd (ex: xxd -i sbat_var.csv sbat_var.h) to convert the SBAT Variable for verifying grub into a header file, and copy it in to SLOF/lib/libcrypto/sbat_var.h. It must
create variables sbat_var_csv and sbat_var_csv_len.

- build SLOF for qemu (make qemu)

- verify that you can boot your VM with new SLOF and stock grub.

To boot with new SLOF, pass -bios ./SLOF/boot_rom.bin . It should boot with new slof in secure boot mode.

sudo ./build/qemu-system-ppc64 -m 8192 -M pseries-2.12,accel=kvm,cap-ail-mode-3=off,secure-boot=on -nographic -vga none -smp 4 -hdd pseries-ubuntu-20.04.6.qcow2 -bios ./boot_rom.bin

- Build grub in your VM.

- Build the SBAT metadata into grub.The following incantation should give you a working but non-portable grub, assuming you have grub installed on /dev/sda2:

GRUB_MODULES="all_video boot btrfs cat configfile echo ext2 fat font gfxmenu gfxterm gzio halt hfsplus http iso9660 jpeg loadenv loopback linux lvm mdraid09 mdraid1x minicmd net normal part_apple part_msdos part_gpt password_pbkdf2 png reboot regexp search search_fs_uuid search_fs_file search_label serial sleep syslinuxcfg test tftp video xfs"

   sudo ./grub-install --modules "$GRUB_MODULES" -d ./grub-core/ -v "/dev/sda2" --sbat=./sbat_metadata.csv
   dd if=/boot/grub/powerpc-ieee1275/core.elf of=/dev/sda2

Sudhakar Kuppusamy (2):
mkimage: create new ELF Note for SBAT
mkimage: adding sbat metadata into sbat ELF Note on powerpc

 include/grub/util/mkimage.h |  4 +--
 util/grub-mkimagexx.c       | 51 +++++++++++++++++++++++++++++++++++--
 util/mkimage.c              | 17 ++++++++++---
 3 files changed, 64 insertions(+), 8 deletions(-)
Signature · 7 lines
2.39.3


_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel