net: stmmac: qcom-ethqos: enable 2.5G ethernet on sa8775p-ride
Status from this message: This series was applied to netdev/net-next.git (main)
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest2 patches 3 repliesApplied 2/2
- v22 patches 6 repliesSuperseded
Changes in v3 from the cover letter
- only apply the SGMII loopback quirk on Rev 3 of the sa8775p-ride board
- extend the commit message in patch 2 to explain the situation in detail Link to v2: https://lore.kernel.org/netdev/[email protected]/
Patches in v3 All 2 applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | net: stmmac: qcom-ethqos: add support for 2.5G BASEX modedrivers/ | +11 | 1 reply | Applied |
| 2/2 | net: stmmac: qcom-ethqos: enable SGMII loopback during DMA reset on sa8775p-ride-r3drivers/ | +23 | 1 reply | Applied |
Reviews trailers per patch
All 2 patches have a Reviewed-by or Acked-by.
| Patch | Andrew Lunn |
|---|---|
| 1/2 | R-b |
| 2/2 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH net-next v3 0/2] net: stmmac: qcom-ethqos: enable 2.5G ethernet on sa8775p-ride
From: Bartosz Golaszewski <[email protected]>
Here are the changes required to enable 2.5G ethernet on sa8775p-ride. As advised by Andrew Lunn and Russell King, I am reusing the existing stmmac infrastructure to enable the SGMII loopback and so I dropped the patches adding new callbacks to the driver core. I also added more details to the commit message and made sure the workaround is only enabled on Rev 3 of the board (with AQR115C PHY). Also: dropped any mentions of the OCSGMII mode.
Changes since v2:
- only apply the SGMII loopback quirk on Rev 3 of the sa8775p-ride board
- extend the commit message in patch 2 to explain the situation in detail Link to v2: https://lore.kernel.org/netdev/[email protected]/
Changes since v1:
- split out the stmmac patches into their own series
- don't add new callbacks to the stmmac core, reuse existing
infrastructure instead
- don't try to add a new PHY mode (OCSGMII) but reuse 2500BASEX instead
Link to v1: https://lore.kernel.org/linux-arm-kernel/[email protected]/T/
Bartosz Golaszewski (2):
net: stmmac: qcom-ethqos: add support for 2.5G BASEX mode
net: stmmac: qcom-ethqos: enable SGMII loopback during DMA reset on
sa8775p-ride-r3
.../stmicro/stmmac/dwmac-qcom-ethqos.c | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)
Signature · 1 line
2.43.0