Skip to content

Add support for Kontron OSM-S i.MX93 SoM and carrier board

Frieder Schrempf imx linux-arm-kernel linux-devicetree linux-gpio linux-i2c linux-renesas-soc lkml 1 version Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest7 patches 9 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/7dt-bindings: eeprom: at24: Move compatible for Belling BL24C16A to proper placeDocumentation/devicetree/bindings/eeprom/at24.yaml+3 -41 reply
2/7dt-bindings: eeprom: at24: Add compatible for ONSemi N24S64BDocumentation/devicetree/bindings/eeprom/at24.yaml+3 -01 reply
3/7dt-bindings: gpio: vf610: Allow gpio-line-names to be setDocumentation/devicetree/bindings/gpio/gpio-vf610.yaml+1 -02 replies
4/7dt-bindings: regulator: pca9450: Make interrupt optionalDocumentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml+0 -12 replies
5/7dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boardsDocumentation/devicetree/bindings/arm/fsl.yaml+6 -01 reply
6/7regulator: pca9450: Make IRQ optionaldrivers/regulator/pca9450-regulator.c+19 -220 replies
7/7arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier boardarch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi+712 -01 reply

Reviews trailers per patch

3 of 7 patches have a Reviewed-by or Acked-by.

PatchKrzysztof Kozlowski
1/7A-b
2/7A-b
3/7
4/7
5/7A-b
6/7
7/7

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/7] Add support for Kontron OSM-S i.MX93 SoM and carrier board

From: Frieder Schrempf <[email protected]>

Patch 1-4: small DT binding fixups Patch 5: board DT bindings
Patch 6: support PMIC driver without IRQ Patch 7: add devicetrees

Frieder Schrempf (7):
dt-bindings: eeprom: at24: Move compatible for Belling BL24C16A to
proper place
dt-bindings: eeprom: at24: Add compatible for ONSemi N24S64B
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
dt-bindings: regulator: pca9450: Make interrupt optional
dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boards
regulator: pca9450: Make IRQ optional
arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier
board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/eeprom/at24.yaml      |  10 +-
 .../devicetree/bindings/gpio/gpio-vf610.yaml  |   1 +
 .../regulator/nxp,pca9450-regulator.yaml      |   1 -
 .../dts/freescale/imx93-kontron-bl-osm-s.dts  | 165 ++++++
 .../dts/freescale/imx93-kontron-osm-s.dtsi    | 547 ++++++++++++++++++
 drivers/regulator/pca9450-regulator.c         |  41 +-
 7 files changed, 744 insertions(+), 27 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
Signature · 1 line
2.45.2