Skip to content

riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

E Shattow linux-devicetree linux-riscv lkml 5 versions – Applied

Status from this message: Applied to riscv-dt-for-next, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest1 patch 1 replyApplied
  2. v51 patch 7 repliesSuperseded
  3. v41 patch 0 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v31 patch0 repliesSuperseded
v21 patch0 repliesSuperseded

Changes in v6 from the cover letter

- Rebase on latest master
- Addtional detail to commit description

Patches in v6 Applied

#Subject and filesSizeRepliesApplied
1/1riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host functionarch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts+17 -10 replies

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by.

PatchEmil Renner Berthing
1/1R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v6 thread

Cover letter [PATCH v6 0/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

Enable host mode JH7110 on-chip USB for Milk-V Mars by setting host mode and connect vbus pinctrl.

This functionality depends on setting the USB over-current register to disable at bootloader phase, for example U-Boot:
https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/

If the over-current register is not prepared for us then the result is no change in functional outcome with this patch applied; there is an error visible to the user and this additional usb configuration fails (same as it is now). On Milk-V Mars with four USB-A ports this applies to one of the USB-A ports and the remaining three VL805-connected USB-A ports via PCIe are not changed.

Changes since v5:
- Rebase on latest master
- Addtional detail to commit description

Changes since v4:
- Rebase on latest master

Changes since v3:
- Rebase on linux-next/master
- use tabs for code indent

Changes since v2:
- Rebase on 6.12

E Shattow (1):
riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

 .../boot/dts/starfive/jh7110-milkv-mars.dts    | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
Signature · 1 line
2.45.2