Skip to content

J722S: DT Node cleanup for serdes0 and serdes1

Siddharth Vadapalli linux-arm-kernel linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 6 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm64: dts: ti: k3-j722s-main: don't disable serdes0 and serdes1arch/arm64/boot/dts/ti/k3-j722s-main.dtsi+0 -40 replies
2/2arm64: dts: ti: k3-j722s-evm: drop redundant status within serdes0/serdes1arch/arm64/boot/dts/ti/k3-j722s-evm.dts+0 -20 replies

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchUdit Kumar
SeriesR-b
1/2
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] J722S: DT Node cleanup for serdes0 and serdes1

Hello,

This series is based on the following series:
https://patchwork.kernel.org/project/linux-arm-kernel/cover/[email protected]/
Based on the discussion in the above series which disabled 'serdes_wiz0' and 'serdes_wiz1' nodes in the SoC file and enabled them in the board file, Udit pointed out that it wasn't necessary to disable 'serdes0' and 'serdes1' in the SoC file anymore, since that is not a working configuration - serdes_wizX enabled and serdesX disabled doesn't work.

Hence, this series aims to cleanup the serdesX nodes after the changes made by the above series.

Regards,
Siddharth.

Siddharth Vadapalli (2):
arm64: dts: ti: k3-j722s-main: don't disable serdes0 and serdes1
arm64: dts: ti: k3-j722s-evm: drop redundant status within
serdes0/serdes1

 arch/arm64/boot/dts/ti/k3-j722s-evm.dts   | 2 --
 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 4 ----
 2 files changed, 6 deletions(-)
Signature · 1 line
2.34.1