Skip to content

Add ti,suppress-v1p8-ena

Judith Mendez linux-arm-kernel linux-devicetree linux-mmc lkml oe-kbuild-all stable 2 versions In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest posting 2/23 patches 4 repliesIn review
  2. v3 posting 1/23 patches 1 replySuperseded

Changes in v3 from the cover letter

- Include patch 3/3
- Reword cover letter
- Reword binding patch description
- Add fixes/cc tags to driver patch
- Reorder patches according to binding patch first
- Resend to fix cc list in original v3 series

Patches in v3 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: mmc: sdhci-am654: Add ti,suppress-v1p8-enaDocumentation/devicetree/bindings/mmc/sdhci-am654.yaml+5 -02 replies
2/3mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switchdrivers/mmc/host/sdhci_am654.c+32 -00 replies
3/3arm64: dts: ti: k3-am62*: add ti,suppress-v1p8-enaarch/arm64/boot/dts/ti/k3-am62-main.dtsi arch/arm64/boot/dts/ti/k3-am62a-main.dtsi arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi+3 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH RESEND v3 0/3] Add ti,suppress-v1p8-ena

Resend patch series to fix cc list

There are MMC boot failures seen with V1P8_SIGNAL_ENA on Kingston eMMC and Microcenter/Patriot SD cards on Sitara K3 boards due to the HS200 initialization sequence involving V1P8_SIGNAL_ENA. Since V1P8_SIGNAL_ENA is optional for eMMC, do not set V1P8_SIGNAL_ENA by default for eMMC. For SD cards we shall parse DT for ti,suppress-v1p8-ena property to determine whether to suppress V1P8_SIGNAL_ENA. Add new ti,suppress-v1p8-ena to am62x, am62ax, and am62px SoC dtsi files since there is no internal LDO tied to sdhci1 interface so V1P8_SIGNAL_ENA only affects timing.

This fix was previously merged in the kernel, but was reverted due to the "heuristics for enabling the quirk"[0]. This issue is adressed in this patch series by adding optional ti,suppress-v1p8-ena DT property which determines whether to apply the quirk for SD.

Changes since v2:
- Include patch 3/3
- Reword cover letter
- Reword binding patch description
- Add fixes/cc tags to driver patch
- Reorder patches according to binding patch first
- Resend to fix cc list in original v3 series

Link to v2:
https://lore.kernel.org/linux-mmc/[email protected]/
Link to v1:
https://lore.kernel.org/linux-mmc/[email protected]/

[0] https://lore.kernel.org/linux-mmc/[email protected]/

Judith Mendez (3):
dt-bindings: mmc: sdhci-am654: Add ti,suppress-v1p8-ena
mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch
arm64: dts: ti: k3-am62*: add ti,suppress-v1p8-ena

 .../devicetree/bindings/mmc/sdhci-am654.yaml  |  5 +++
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi      |  1 +
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi     |  1 +
 .../dts/ti/k3-am62p-j722s-common-main.dtsi    |  1 +
 drivers/mmc/host/sdhci_am654.c                | 32 +++++++++++++++++++
 5 files changed, 40 insertions(+)

base-commit: 1be38f81251f6d276713c259ecf4414f82f22c29

Signature · 1 line
2.49.0