Add FriendlyElec NanoPi M5 support for Rockchip RK3576
Status from this message: Applied, thanks!
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v5 Latest2 patches 1 replyApplied
- v42 patches 2 repliesSuperseded
- v32 patches 1 replySuperseded
Earlier versions · 2
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v2 | 2 patches | 0 replies | Superseded | |
| v1 | 2 patches | 2 replies | Superseded |
Changes in v5 from the cover letter
- Addressed Jonas Karlman's feedback:
- Added mmc0 alias for SD card
- Updated regulator names to match schematic (e.g., vcc12v_dcin,
Patches in v5 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 boardDocumentation/ | +6 | 0 replies | |
| 2/2 | arm64: dts: rockchip: Add FriendlyElec NanoPi M5 supportarch/ arch/ | +942 | 0 replies |
Reviews trailers per patch
1 of 2 patches has a Reviewed-by or Acked-by.
| Patch | Rob Herring (Arm) |
|---|---|
| 1/2 | A-b |
| 2/2 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v5 0/2] Add FriendlyElec NanoPi M5 support for Rockchip RK3576
This series adds device tree support for the FriendlyElec NanoPi M5 board, powered by the Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). The patches enable basic booting and connectivity, including dual 1Gbps Ethernet, USB 3.2, microSD, M.2 PCIe NVMe, and HDMI.
Changes in v5:
- Addressed Jonas Karlman's feedback:
- Added mmc0 alias for SD card
- Updated regulator names to match schematic (e.g., vcc12v_dcin,
vcc5v0_sys_s5, vcc3v3_m2_keym, vcc3v3_sd_s0, usb3_port2_5v,
vcc5v0_usb_otg0, vcc5v_hdmi_tx)
- Fixed vcc3v3_sd_s0 voltage to 3.3V
- Removed unnecessary regulator-state-mem for fixed regulators
- Removed vcc_5v0_device regulator
- Added pinctrl for Ethernet PHY reset GPIOs in mdio0 and mdio1
- Used correct pinctrl format for sdmmc and sfc1 (<&pin>)
- Increased SPI flash frequency to 50 MHz
- Updated LED colors (sys: red, led1/led2: green) and functions
(LED_FUNCTION_HEARTBEAT, LED_FUNCTION_LAN)
- Dropped rng node (enabled by default)
- Omitted HDMI mode-switching GPIO (to be added later with driver
support)
- Updated pinctrl names to match schematic (e.g., pcie0_pwren_h,
sdmmc0_pwren_h, usb3_host_pwren_h, usb_otg0_pwren_h, hp_det_l,
pcie0_perstn)Changes in v4:
- Addressed Diederik's feedback:
- Renamed pinctrl nodes to align with schematic labels
- Moved pinctrl-0 and pinctrl-names into button-user sub-node
Changes in v3:
- Improved (even more) fspi1m1_pins comment for clarity, specifying gpio1_d5, gpio1_c4-c7 (clk, d0-d4) for SPI NOR flash.
- Removed redundant #address-cells and #size-cells from sfc1 node, as they are inherited from rk3576.dtsi.
Changes in v2:
- Fixed DT schema warnings (Rob Herring):
- Renamed spi-nor@0 to flash@0
- Renamed pmic@23 pinctrl nodes to end with -pins
- Renamed hym8563@51 to rtc@51 and removed clock-frequency
- Renamed button@1 to button-user
- Addressed Heiko Stuebner's feedback:
- Sorted non-addressed nodes alphabetically
- Added blank lines in regulator nodes
- Improved fspi1m1_pins comment to clarify SPI NOR flash pinmux
- Moved status property in saradc to last
Patch 1: Updates DT bindings in rockchip.yaml Patch 2: Adds NanoPi M5 device tree and Makefile entry
No MAINTAINERS update needed, as the new file is covered by the existing ARM/Rockchip SoC entry.
Tested on NanoPi M5 with successful boot and feature validation.
---
John Clark (2):
dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
.../devicetree/bindings/arm/rockchip.yaml | 6 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3576-nanopi-m5.dts | 941 ++++++++++++++++++ 3 files changed, 948 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts
Signature · 1 line
2.39.5