Skip to content

net: dsa: b53: mmap: Add bcm63268 GPHY power control

Kyle Hendry lkml netdev 2 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (main)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v1 Latest posting 2/22 patches 0 repliesApplied 2/2
  2. v1 posting 1/22 patches 3 repliesSuperseded

Patches in v1 posting 2/2 All 2 applied

#Subject and filesSizeRepliesApplied
1/2net: dsa: b53: mmap: Add gphy port to phy info for bcm63268drivers/net/dsa/b53/b53_mmap.c+2 -00 repliesApplied
2/2net: dsa: b53: mmap: Implement bcm63268 gphy power controldrivers/net/dsa/b53/b53_mmap.c+29 -40 repliesApplied

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchFlorian Fainelli
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH RESEND net-next 0/2] net: dsa: b53: mmap: Add bcm63268 GPHY power control

The gpio controller on the bcm63268 has a register for controlling the gigabit phy power. These patches disable low power mode when enabling the gphy port.

This is based on an earlier patch series here:
https://lore.kernel.org/netdev/[email protected]/

I have created a new series since many of the changes were included in the ephy control patches:
https://lore.kernel.org/netdev/[email protected]/

Kyle Hendry (2):
net: dsa: b53: mmap: Add gphy port to phy info for bcm63268
net: dsa: b53: mmap: Implement bcm63268 gphy power control

 drivers/net/dsa/b53/b53_mmap.c | 35 ++++++++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)
Signature · 1 line
2.43.0