Skip to content

Add motorcomm 8531s set ds func and 8522 driver

Minda Chen lkml netdev 6 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (main)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest3 patches 0 repliesApplied 3/3
  2. v53 patches 2 repliesSuperseded
  3. v43 patches 5 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v33 patches4 repliesSuperseded
v23 patches2 repliesSuperseded
v13 patches3 repliesSuperseded

Changes in v6 from the cover letter

1. patch3 correct AUTOSLEEP bit, (from sashiko test)
2. patch2 add review tag.

Patches in v6 All 3 applied

#Subject and filesSizeRepliesApplied
1/3net: phy: motorcomm: move mdio lock out from yt8531_set_ds()drivers/net/phy/motorcomm.c+14 -90 repliesApplied
2/3net: motorcomm: phy: set drive strength in YT8531s RGMIIdrivers/net/phy/motorcomm.c+5 -00 repliesApplied
3/3net: phy: motorcomm: Add YT8522 100M RMII PHY supportdrivers/net/phy/motorcomm.c+48 -10 repliesApplied

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchMaxime ChevallierAndrew Lunn
1/3R-b R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v6 thread

Cover letter [net-next v6 0/3] Add motorcomm 8531s set ds func and 8522 driver

This patch is for Starfive JHB100 EVB board. JHB100 contain 1 RGMII/RMII and 1 RMII synopsys GMAC cores. In the EVB board, RGMII interface connect with YT8531s Ethernet PHY. RMII interface connect with YT8522 ethernet PHY. So patch 1-2 is for RGMII interface patch 3 is RMII is for RMII interface.

JHB100 is a Starfive new RISC-V SoC for datacenter BMC (BaseBoard Managent Controller). Similar with Aspeed 27x0.

The JHB100 minimal system upstream is in progress:
https://patchwork.kernel.org/project/linux-riscv/cover/[email protected]/

The patch base net-next (base commit list below)

previous commit
v1: https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
v2:https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/ v3:
https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
v4:https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/

The change list:
v6:
1. patch3 correct AUTOSLEEP bit, (from sashiko test)
2. patch2 add review tag.
v5:
1. patch1 and patch3 add review tag
2. patch2 using phydev_id_compare()
v4:
1. Add review tag
2. patch 2 check interface first and Add the reason of checking PHY ID in commit message.
v3:
1. change some commit message.
v2:
1. patch1 move mdio lock out from yt8531_set_ds().
2. patch2 changed to phy_interface_is_rgmii().

Minda Chen (3):
net: phy: motorcomm: move mdio lock out from yt8531_set_ds()
net: motorcomm: phy: set drive strength in YT8531s RGMII
net: phy: motorcomm: Add YT8522 100M RMII PHY support

 drivers/net/phy/motorcomm.c | 77 ++++++++++++++++++++++++++++++++-----
 1 file changed, 67 insertions(+), 10 deletions(-)

base-commit: bfa3d89cc15c09f7d1581c834a5ed725189ec19f

Signature · 1 line
2.17.1