Skip to content

Enable Bluetooth and WiFi on K3 Pico ITX

Aurelien Jarno linux-devicetree linux-riscv lkml spacemit 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest5 patches 2 repliesIn review 4 of 5 applied
  2. v3 posting 2/25 patches 1 replySuperseded
  3. v3 posting 1/25 patches 4 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v24 patches3 repliesSuperseded
v14 patches1 replySuperseded

Changes v4 (unfortunately wrongly submitted as v3) -> v5 from the cover letter

- rebase onto spacemit/dt-for-next
- explain in patch1 why the change does not impact the DT schema validation (reported by Sashiko)

Patches in v5 4 of 5 applied

#Subject and filesSizeRepliesApplied
1/5riscv: dts: spacemit: k3: move USB3 phy to board levelarch/riscv/boot/dts/spacemit/k3-pico-itx.dts arch/riscv/boot/dts/spacemit/k3.dtsi+2 -30 repliesApplied
2/5riscv: dts: spacemit: k3: add USB3 B and C controllers for Pico-ITX boardarch/riscv/boot/dts/spacemit/k3-pico-itx.dts arch/riscv/boot/dts/spacemit/k3.dtsi+82 -01 replyApplied
3/5riscv: dts: spacemit: k3: add rfkill node for Bluetooth on Pico-ITX boardarch/riscv/boot/dts/spacemit/k3-pico-itx.dts+7 -00 repliesApplied
4/5riscv: dts: spacemit: k3: add rfkill node for WLAN on the K3 Pico-ITX boardarch/riscv/boot/dts/spacemit/k3-pico-itx.dts+7 -00 repliesApplied
5/5riscv64: defconfig: Enable BT and WLAN support for SpacemiT K3 Pico-ITX boardarch/riscv/configs/defconfig+8 -00 replies

Reviews trailers per patch

None of the 5 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchAnirudh SrinivasanYixun Lan
SeriesR-b
1/5
2/5T-b
3/5T-b
4/5T-b
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 0/5] Enable Bluetooth and WiFi on K3 Pico ITX

This patchset enables Bluetooth through USB on the K3 Pico ITX board and adds the rfkill nodes for Bluetooth and WLAN so that the devices can be activated.

Note that WLAN support (patch 4) is only useful with the following patchset, but they can be applied independently:
- https://lore.kernel.org/spacemit/[email protected]/T/#t

Changes v4 (unfortunately wrongly submitted as v3) -> v5
- rebase onto spacemit/dt-for-next
- explain in patch1 why the change does not impact the DT schema validation (reported by Sashiko)

Changes v3 -> v4
- fully move the phy definition and the board level
- rebase onto 7.3-rc1

Changes v2 -> v3
- reorder patches in a more logical order
- rebase on current linus/master
- add patch 1 to move phy definition to the board level for the "usb3d" controller
- remove link to USB3 phys, they can't be added if the combo phy is not configured accordingly - also enable Bluetooth and WLAN drivers in defconfig

Changes v1 -> v2
- Rebase on current spacemit/dt-for-next branch
- Collect Tested-by tag
- Add link to USB3 PHYs in DT now that K3 PHY support is merged

Aurelien Jarno (5):
riscv: dts: spacemit: k3: move USB3 phy to board level
riscv: dts: spacemit: k3: add USB3 B and C controllers for Pico-ITX
board
riscv: dts: spacemit: k3: add rfkill node for Bluetooth on Pico-ITX
board
riscv: dts: spacemit: k3: add rfkill node for WLAN on the K3 Pico-ITX
board
riscv64: defconfig: Enable BT and WLAN support for SpacemiT K3
Pico-ITX board

 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 38 ++++++++++++
 arch/riscv/boot/dts/spacemit/k3.dtsi         | 63 +++++++++++++++++++-
 arch/riscv/configs/defconfig                 |  8 +++
 3 files changed, 106 insertions(+), 3 deletions(-)
Signature · 1 line
2.53.0