Skip to content

RFC 'Comming of Age'

Graeme Russ u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest0 of 21 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 21 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [RFC][PATCH 00/21] [x86] 'Comming of Age'
Quoted 5 lines · Peter Tyser

< snip>

Quoted 3 lines

Once this patchset is applied I believe the x86 port of U-Boot will be ready for more mainstream use

Quoted 8 lines
Quoted 2 lines

Wolfgang - If there is any other renewed interest in the x86 port, I would be more than happy to be an official custodian

Hi Graeme,
Is there a quick summary about what is supported, how its used, etc? Eg could x86 U-Boot replace the BIOS on on chipset X, similar to coreboot? Or is it a 2nd stage bootloader like GRUB? Or a bootloader that is run from GRUB? How hard would it be to port to other x86 platform?

The x86 U-Boot port, like all other U-Boot ports, is a primary boot loader for embedded systems. As such, it is designed to bring a board up from power-on/cold reset to a state where Linux (or other OS) can execute (e.g load FPGAs, configure hardware address and I/O structures etc). The closest 'in-the-wild' comparative software would be RedBoot.

The current implementation is designed around the AMD SC520 ELAN CPU, but porting to other x86 CPUs and boards should be fairly simple. Porting is made easier if the target is PC/AT centric. That said, the modular design should allow for very easy diversion from PC/AT.

It does not (and will not) replace the BIOS of a regular PC (Coreboot) nor will it be a second stage bootloader (GRUB). However, at a pinch, I imagine you could use it to boot a VIA mini-ITX board for example.

Quoted 3 lines

It seems like cool stuff, I'm just trying to wrap my head around the high-level concept of U-Boot on x86 and where/why it'd be used instead of the "standard" alternatives.

x86 is a poor second cousin to PPC and ARM in the embedded world. The reasons for this are many and varied, but generally speaking ARM and PPC are better suited to the embedded world due to lower power consumption and integrated peripherals. x86 has its advantages (no need for cross compiling, easier to simulate and a PC without using QEMU etc).

x86 U-Boot does do a few things though that I think are very special:
- It fully relocates itself to the highest available RAM (including
Read-Only data and special data structures like the GDT and IDT which are sometimes overlooked)
- It can be fail-safe boot-strapped from RAM (i.e. boot an old version
from power-up, tftp a new version, jump to the new version)

In the near future, I intend to make it 100% relocatable (i.e. does not need to be loaded at TEXT_BASE) and maybe even add the ability to specify the relocation address.

Quoted 4 lines

Thanks,
Peter

Your welcome :)
Graeme