Skip to content

Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate

julian.pidancet at citrix.com u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest4 patches 0 repliesNew
  2. v11 patch 0 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4Kirkwood: Rename openrd_base board files to openrd.board/Marvell/openrd/Makefile board/Marvell/openrd/kwbimage.cfg board/Marvell/openrd/openrd.c +4 more+122 -8256 replies
2/4Change OpenRD Base board identification string.include/configs/openrd_base.h+1 -11 reply
3/4Add support for the Client variant of the OpenRD board.MAKEALL board/Marvell/openrd/openrd.c boards.cfg +1 more+63 -31 reply
4/4Add support for the Ultimate variant of the OpenRD boardMAKEALL board/Marvell/openrd/openrd.c boards.cfg +1 more+49 -10 replies

Reviews trailers per patch

None of the 4 patches has a Reviewed-by or Acked-by.

PatchAlbert ARIBAUD
SeriesT-b
1/4
2/4
3/4
4/4

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/4] Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate

From: Julian Pidancet <[email protected]>

This patch modifies existing OpenRD-Base support to deal with all the three OpenRD boards (OpenRD-Base, OpenRD-Client & OpenRD-Ultimate). This is based on an original patch sent by Tanmay Upadhyay. Most of the credits goes to him.
Previous version of this patch has been reworked to separate file renaming from the actual addition of Client and Ultimate variants support.

A nice future improvement would be to add variant detection and configuration at run-time as suggested on the mailing-list in a recent email. So one could use the same binary for all board variants.

Julian Pidancet (4):
Kirkwood: Rename openrd_base board files to openrd. Change OpenRD Base board identification string. Add support for the Client variant of the OpenRD board. Add support for the Ultimate variant of the OpenRD board

 MAKEALL                                            |    2 +
 board/Marvell/{openrd_base => openrd}/Makefile     |    2 +-
 board/Marvell/{openrd_base => openrd}/kwbimage.cfg |    0
 .../{openrd_base/openrd_base.c => openrd/openrd.c} |   28 ++++-
 .../{openrd_base/openrd_base.h => openrd/openrd.h} |    6 +-
 boards.cfg                                         |    4 +-
 include/configs/openrd.h                           |  107 ++++++++++++++++++++
 include/configs/openrd_base.h                      |   85 ++--------------
 include/configs/openrd_client.h                    |   44 ++++++++
 include/configs/openrd_ultimate.h                  |   44 ++++++++
 10 files changed, 235 insertions(+), 87 deletions(-)
 rename board/Marvell/{openrd_base => openrd}/Makefile (98%)
 rename board/Marvell/{openrd_base => openrd}/kwbimage.cfg (100%)
 rename board/Marvell/{openrd_base/openrd_base.c => openrd/openrd.c} (83%)
 rename board/Marvell/{openrd_base/openrd_base.h => openrd/openrd.h} (95%)
 create mode 100644 include/configs/openrd.h
 create mode 100644 include/configs/openrd_client.h
 create mode 100644 include/configs/openrd_ultimate.h
Signature · 1 line
Julian Pidancet