Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate
PATCH 1/1 Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate
This patch modifies existing OpenRD-Base support to deal with all the three OpenRD boards (OpenRD-Base, OpenRD-Client & OpenRD-Ultimate).
This is a rebase onto master from an original patch sent by Tanmay Upadhyay a few months ago. All credits goes to him.
It's been tested on my OpenRD-Ultimate and works perfectly fine.
--- MAKEALL | 2 + board/Marvell/openrd/Makefile | 56 ++++++++++ board/Marvell/openrd/config.mk | 33 ++++++ board/Marvell/openrd/kwbimage.cfg | 168 ++++++++++++++++++++++++++++++ board/Marvell/openrd/openrd.c | 173 +++++++++++++++++++++++++++++++ board/Marvell/openrd/openrd.h | 50 +++++++++ board/Marvell/openrd_base/Makefile | 56 ---------- board/Marvell/openrd_base/kwbimage.cfg | 168 ------------------------------ board/Marvell/openrd_base/openrd_base.c | 153 --------------------------- board/Marvell/openrd_base/openrd_base.h | 46 -------- boards.cfg | 4 +- include/configs/openrd.h | 115 ++++++++++++++++++++ include/configs/openrd_base.h | 92 +++-------------- include/configs/openrd_client.h | 50 +++++++++ include/configs/openrd_ultimate.h | 50 +++++++++ 15 files changed, 714 insertions(+), 502 deletions(-) create mode 100644 board/Marvell/openrd/Makefile create mode 100644 board/Marvell/openrd/config.mk create mode 100644 board/Marvell/openrd/kwbimage.cfg create mode 100644 board/Marvell/openrd/openrd.c create mode 100644 board/Marvell/openrd/openrd.h delete mode 100644 board/Marvell/openrd_base/Makefile delete mode 100644 board/Marvell/openrd_base/kwbimage.cfg delete mode 100644 board/Marvell/openrd_base/openrd_base.c delete mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 include/configs/openrd.h create mode 100644 include/configs/openrd_client.h create mode 100644 include/configs/openrd_ultimate.h
MAKEALL +2 -0
@@ -361,6 +361,8 @@ LIST_ARM9=" \ omap5912osk \ omap730p2 \ openrd_base \ + openrd_client \ + openrd_ultimate \ rd6281a \ sbc2410x \ scb9328 \
board/Marvell/openrd/Makefile new file +56 -0
56 lines not on this page · raw message
board/Marvell/openrd/config.mk new file +33 -0
@@ -0,0 +1,33 @@ +# +# (C) Copyright 2009 +# Net Insight <www.netinsight.net> +# Written-by: Simon Kagstrom <[email protected]> +# +# Based on sheevaplug: +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +TEXT_BASE = 0x00600000 + +# Kirkwood Boot Image configuration file +KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
board/Marvell/openrd/kwbimage.cfg new file +168 -0
168 lines not on this page · raw message
board/Marvell/openrd/openrd.c new file +173 -0
173 lines not on this page · raw message
board/Marvell/openrd/openrd.h new file +50 -0
50 lines not on this page · raw message
board/Marvell/openrd_base/Makefile deleted +0 -56
56 lines not on this page · raw message
board/Marvell/openrd_base/kwbimage.cfg deleted +0 -168
168 lines not on this page · raw message
board/Marvell/openrd_base/openrd_base.c deleted +0 -153
153 lines not on this page · raw message
board/Marvell/openrd_base/openrd_base.h deleted +0 -46
46 lines not on this page · raw message
boards.cfg +3 -1
@@ -96,7 +96,9 @@ davinci_sonata arm arm926ejs sonata davinci suen3 arm arm926ejs km_arm keymile kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood -openrd_base arm arm926ejs - Marvell kirkwood +openrd_base arm arm926ejs openrd Marvell kirkwood +openrd_client arm arm926ejs openrd Marvell kirkwood +openrd_ultimate arm arm926ejs openrd Marvell kirkwood rd6281a arm arm926ejs - Marvell kirkwood sheevaplug arm arm926ejs - Marvell kirkwood dockstar arm arm926ejs - Seagate kirkwood
include/configs/openrd.h new file +115 -0
115 lines not on this page · raw message
include/configs/openrd_base.h +14 -78
109 lines not on this page · raw message
include/configs/openrd_client.h new file +50 -0
50 lines not on this page · raw message
include/configs/openrd_ultimate.h new file +50 -0
50 lines not on this page · raw message
-- 1.7.4
PATCH 1/1 Kirkwood: Add support for OpenRD-Client & OpenRD-Ultimate
Quoted 45 lines
-----Original Message-----
From: Julian Pidancet [mailto:julian.pidancet at citrix.com]
Sent: Tuesday, February 08, 2011 10:21 AM
To: u-boot at lists.denx.de
Cc: tanmay.upadhyay at einfochips.com; Prafulla Wadaskar
Subject: [PATCH] Kirkwood: Add support for OpenRD-Client & OpenRD- UltimateThis patch modifies existing OpenRD-Base support to deal with all the three OpenRD boards (OpenRD-Base, OpenRD-Client & OpenRD-Ultimate).
This is a rebase onto master from an original patch sent by Tanmay Upadhyay a few months ago.
All credits goes to him.
It's been tested on my OpenRD-Ultimate and works perfectly fine.Signed-off-by Julian Pidancet <[email protected]><mailto:[email protected]>
--- MAKEALL | 2 + board/Marvell/openrd/Makefile | 56 ++++++++++ board/Marvell/openrd/config.mk | 33 ++++++ board/Marvell/openrd/kwbimage.cfg | 168 ++++++++++++++++++++++++++++++ board/Marvell/openrd/openrd.c | 173 +++++++++++++++++++++++++++++++ board/Marvell/openrd/openrd.h | 50 +++++++++ board/Marvell/openrd_base/Makefile | 56 ---------- board/Marvell/openrd_base/kwbimage.cfg | 168 ------------------------ ------ board/Marvell/openrd_base/openrd_base.c | 153 ------------------------ --- board/Marvell/openrd_base/openrd_base.h | 46 -------- boards.cfg | 4 +- include/configs/openrd.h | 115 ++++++++++++++++++++ include/configs/openrd_base.h | 92 +++-------------- include/configs/openrd_client.h | 50 +++++++++ include/configs/openrd_ultimate.h | 50 +++++++++ 15 files changed, 714 insertions(+), 502 deletions(-) create mode 100644 board/Marvell/openrd/Makefile create mode 100644 board/Marvell/openrd/config.mk create mode 100644 board/Marvell/openrd/kwbimage.cfg create mode 100644 board/Marvell/openrd/openrd.c
Quoted 8 lines
create mode 100644 board/Marvell/openrd/openrd.h delete mode 100644 board/Marvell/openrd_base/Makefile delete mode 100644 board/Marvell/openrd_base/kwbimage.cfg delete mode 100644 board/Marvell/openrd_base/openrd_base.c delete mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 include/configs/openrd.h create mode 100644 include/configs/openrd_client.h create mode 100644 include/configs/openrd_ultimate.h
Hi Julian
I suggest not to delete old file, on the other hand you can rename or move them through git.
Regards...
Prafulla . .