Enable ethernet support for SOCFPGA
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/4] Enable ethernet support for SOCFPGA
Quoted 69 lines · Jack Mitchell
Quoted 33 lines · dinguyen at altera.com
From: Dinh Nguyen <[email protected]>
Hello,
These 4 patches are meant to enable ethernet and SD/MMC for the SOCFPGA platform.
patch (1/4): Adds select
ARM_TWDfor the platform
patch (2/4): Add platform specific initialization for the ethernet controller.
patch (3/4): Commit25c83b5c2added "snps,phy-addr" for getting the PHY addr.
Set the ethernet clocks to beemac_0_clkandemac_1_clkso it
be gated.
patch (4/4): Update defconfig to support SD/MMC, ethernet, EXT3 and NFS.Thanks,
Dinh Nguyen (4):
arm: socfpga: EnableARM_TWDfor socfpga
arm: socfpga: Add platform initialization for ethernet
ARM: socfpga: dts: Fix entries for the ethernet entries.
arm: socfpga: Add support for SD/MMC and ethernet to defconfigarch/arm/boot/dts/socfpga.dtsi | 4 +- arch/arm/boot/dts/socfpga_cyclone5.dts | 2 +- arch/arm/configs/socfpga_defconfig | 8 +++ arch/arm/mach-socfpga/Kconfig | 1 + arch/arm/mach-socfpga/core.h | 8 +++ arch/arm/mach-socfpga/socfpga.c | 85 +++++++++++++++++++++++++++++++- 6 files changed, 104 insertions(+), 4 deletions(-)Quoted 7 lines
CC Arnd Bergmann <[email protected]>CC Olof Johansson <[email protected]>Cc Rob Herring <[email protected]>Cc Thomas Petazzoni <[email protected]>Cc Pavel Machek <[email protected]>Cc Jack Mitchell <[email protected]>Hi Dinh,
What tree is this based against, or what patches are a pre-requisite to this series? I applied the patches to linux-arm/master but the compile failed.
arch/arm/mach-socfpga/socfpga.c: In function 'ksz9021rlrn_phy_fixup':arch/arm/mach-socfpga/socfpga.c:85:21: error:
'MICREL_KSZ9021_EXTREG_CTRL' undeclared (first use in this function)
phy_write(phydev,MICREL_KSZ9021_EXTREG_CTRL,^
arch/arm/mach-socfpga/socfpga.c:85:21: note: each undeclared identifier is reported only once for each function it appears inarch/arm/mach-socfpga/socfpga.c:86:4: error:
'MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW' undeclared (first use in this function)MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000); ^ arch/arm/mach-socfpga/socfpga.c:87:21: error: 'MICREL_KSZ9021_EXTREG_DATA_WRITE' undeclared (first use in this function) phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000); ^ arch/arm/mach-socfpga/socfpga.c:91:4: error: 'MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW' undeclared (first use in this function) MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000); ^
Quoted 8 lines
arch/arm/mach-socfpga/socfpga.c: In function 'socfpga_cyclone5_init':arch/arm/mach-socfpga/socfpga.c:193:30: error: 'PHY_ID_KSZ9021RLRN' undeclared (first use in this function)
phy_register_fixup_for_uid(PHY_ID_KSZ9021RLRN,^Cheers,
Jack.
Dinh,
So I found your patch "phy: micrel: Add definitions for common Micrel PHY registers" and applied it, now the kernel compiles. I do however still run into the "Waiting for root device" issue. This is still on my Arrow SoCkit board, which may be a bit different to the Altera devkit; so please don't let this be a blocker if it works find with your kit. It is strange though that both boards can share the same 3.9-vendor dts/kernel without any changes...
Synopsys Designware Multimedia Card Interface Driver
oprofile: no performance counters
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
Waiting for root device /dev/mmcblk0p2...
Cheers,
Jack.
Signature · 5 lines
Jack Mitchell (jack at embed.me.uk) Embedded Systems Engineer http://www.embed.me.uk --