Skip to content

imx: mx6slevk add pmic support

Stefano Babic u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest3 patches 0 repliesNew
  2. v11 of 4 patches 0 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3imx:mx6sl add I2c pad settings+0 -00 replies
2/3imx:mx6slevk add pmic and i2c configuration+0 -00 replies
3/3imx:mx6slevk implement power init board+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [U-Boot] [PATCH v3 0/3] imx: mx6slevk add pmic support

Hi Peng,

Quoted 22 lines · Peng Fan

This patch set is extracted from the previous "imx:mx6 add ldo bypass" patch set, with only one return value change.

patch 1/3 is add pad settings for I2C1
patch 2/3 is add I2C and PMIC support in board header file patch 3/3 is to add pmic support for mx6slevk.

patch 3/3 is from patch 3/12 in previous "imx:mx6 add ldo bypass" patch, with only one small change is return value.

Changes v3:
Take Fabio's suggestion, for patch 3/3, remove ret variable, and directly "return pfuze_mode_init(xxx)"

Changes v2:
Changing "return -EIO" to "return ret".

Peng Fan (3):
imx:mx6sl add I2c pad settings
imx:mx6slevk add pmic and i2c configuration
imx:mx6slevk implement power init board

Quoted 5 lines
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h |  5 ++++
 board/freescale/mx6slevk/mx6slevk.c        | 42 ++++++++++++++++++++++++++++++
 include/configs/mx6slevk.h                 | 12 +++++++++
 3 files changed, 59 insertions(+)

They look good for me - if no comments will be posted, they will be merge by next iteration.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================