Skip to content

No need for parade bridge on peach-pi

Minkyu Kang u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v3 Latest0 of 2 patches 0 repliesNew

Patches in v3 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [U-Boot] [PATCH 0/2 v3] No need for parade bridge on peach-pi
Quoted 17 lines · Sjoerd Simons

With current u-boot-samsung HEAD on a peach-pi the following error is printed:
exynos_lcd_power_on: ps8625_init() failed

Which is not surprising given that chip does not exist on these boards.

Changes since v2:
* Move the parade_init function to its own header file
Changes since v1:
* Only change the DTS for peach-pi not the default config. Further configuration changes will be done seperately
* Use the approach as suggested by Ajay Kumar to fix compilation without parade support

Sjoerd Simons (2):
Exynos5800: The Peach-Pi board does not have a Parade video bridge
exynos5420: fix compilation without parade video

Quoted 7 lines
 arch/arm/dts/exynos5800-peach-pi.dts      |  5 -----
 arch/arm/include/asm/arch-exynos/system.h |  3 ---
 board/samsung/smdk5420/smdk5420.c         |  1 +
 include/parade.h                          | 18 ++++++++++++++++++
 4 files changed, 19 insertions(+), 8 deletions(-)
 create mode 100644 include/parade.h

applied to u-boot-samsung.

Thanks,
Minkyu Kang.

Read the cover letter in its thread