Skip to content

Gregory CLEMENT linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v3 Latest0 of 7 patches 0 repliesNew

Patches in v3 No applies recorded yet

None of the 7 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/7]

Hi Maxime, Andrew,

Quoted 6 lines · Maxime Ripard

Hi everyone,

This set of patches add the support for the Armada 385 AP board.

It also adds a few clean ups here and there, a few missing pin functions needed for the board, etc.

Maxime,

You forgot to write a topic for this email :)

Andrew,

If you want, in order to ease your job, I can send a series including the patches from Maxime and my patches for this 2 new Armada 38x boards: AP and GP.

But before this I really would like to have the answer from Nadav to switch to the dual license GPL/X11.

Thanks,

Gregory

Quoted 44 lines

Maxime

Changes from v2:
- Removed the i2c1 bus that is not used
- Added comments for the i2c0 and the UARTs
- Removed the i2c clk-frequency property
- Fixed the SPI-NOR maximum frequency
- Fixed the phy nodes unit addresses
- Add the /chosen/stdout-path property
- Changed the filename to match the board compatible

Changes from v1:
- Removed USB3 support. This required some additional patches for the phy and USB drivers that are not really related to this serie. This will be submitted as a separate one.
- Removed earlyprintk from the default bootargs
- Removed two unneeded ranges
- Changed the phy pins node name to mdio
- Moved most of the pinctrl nodes to the DTSI
- Added a comment to mention why the phy reference clock is needed.
- Rebased on top of 3.19-rc1

Maxime Ripard (7):
ARM: mvebu: Rename DEBUG_LL to indicate UART index
ARM: mvebu: Add UART1 as DEBUG_LL possible target
ARM: mvebu: a38x: Fix node names
pinctrl: mvebu: a38x: Add UART1 muxing options
ARM: mvebu: A38x: Remove redundant pinctrl informations
ARM: mvebu: Add a number of pinctrl functions
ARM: mvebu: Add Armada 385 Access Point Development Board support

 arch/arm/Kconfig.debug                     |  35 +++++--
 arch/arm/boot/dts/Makefile                 |   1 +
 arch/arm/boot/dts/armada-380.dtsi          |   3 +-
 arch/arm/boot/dts/armada-385-db-ap.dts     | 150 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/armada-385-db.dts        |   2 +-
 arch/arm/boot/dts/armada-385-rd.dts        |   2 +-
 arch/arm/boot/dts/armada-385.dtsi          |   3 +-
 arch/arm/boot/dts/armada-38x.dtsi          |  44 ++++++++-
 drivers/pinctrl/mvebu/pinctrl-armada-38x.c |   6 +-
 9 files changed, 226 insertions(+), 20 deletions(-)
 create mode 100644 arch/arm/boot/dts/armada-385-db-ap.dts
Signature · 4 lines
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Read the cover letter in its thread