Introducing the Alpine platform.
Get series with b4
b4 am [email protected]Versions newest first
- v3 Latest0 of 5 patches 0 repliesNew
Patches in v3 No applies recorded yet
None of the 5 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 0/5] Introducing the Alpine platform.
Hi Tsahee,
Quoted 65 lines · Tsahee Zidenberg
Annapurna Labs(TM) is a technology company providing innovative solutions including chips, software, and systems for the datacenter and enterprise infrastructure.
Alpine(TM) is one of Annapurna Labs? chip products targeting storage and networking applications. It is a complete Platform-On-Chip, integrating 2-4 cortex-A15 cores and multiple innovations to provide a seamless networking and storage fabric for enterprise and datacenter equipment.
This patchset provides initial support for the Alpine platform.
Patch #1 contains minimal, single-cpu architecture support.
Patch #2 adds early-debug capabilities via Alpine UART 0.
Patch #3 adds smp-support and a secondary cpu enable-method for the platform.
Patch #4 provides documentation for the available device-tree nodes.
Patch #5 provides a device-tree for Alpine soc and development board.
The patchset was tested with
multi_v7_defconfig, addingCONFIG_ARCH_ALPINE---
V2:
* map physical cpu-id from logical on cpu wakeup
* use syscon/regmap forsysfabric_serviceimplementation
* devicetree format:** split between .dtsi and dts ** dual license ** node and manufacturer naming* intoduce devicetree in two separate patches
* multiple format fixes
* rebased on d932006 (for-next)---
V3:
* small format changes
* rebased on f9db7e2 (for-next)Tsahee Zidenberg (5):
ARM: Alpine: Initial support for Alpine platform
ARM: Alpine: early-debug print support
ARM: Alpine: smp support
ARM: dts: Alpine platform binding documentation
ARM: dts: Alpine platform devicetree.../devicetree/bindings/arm/al,alpine.txt | 88 +++++++++++++ .../bindings/arm/cpu-enable-method/al,alpine-smp | 52 ++++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/Kconfig | 2 + arch/arm/Kconfig.debug | 12 +- arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/alpine-db.dts | 35 +++++ arch/arm/boot/dts/alpine.dtsi | 141 +++++++++++++++++++++ arch/arm/mach-alpine/Kconfig | 10 ++ arch/arm/mach-alpine/Makefile | 6 + arch/arm/mach-alpine/alpine_cpu_pm.c | 70 ++++++++++ arch/arm/mach-alpine/alpine_cpu_pm.h | 26 ++++ arch/arm/mach-alpine/alpine_cpu_resume.h | 38 ++++++ arch/arm/mach-alpine/alpine_machine.c | 28 ++++ arch/arm/mach-alpine/platsmp.c | 49 +++++++ 16 files changed, 562 insertions(+), 1 deletion(-)
Quoted 12 lines
create mode 100644
Documentation/devicetree/bindings/arm/al,alpine.txtcreate mode 100644Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smpcreate mode 100644arch/arm/boot/dts/alpine-db.dts
create mode 100644arch/arm/boot/dts/alpine.dtsi
create mode 100644arch/arm/mach-alpine/Kconfig
create mode 100644arch/arm/mach-alpine/Makefile
create mode 100644arch/arm/mach-alpine/alpine_cpu_pm.c
create mode 100644arch/arm/mach-alpine/alpine_cpu_pm.h
create mode 100644arch/arm/mach-alpine/alpine_cpu_resume.h
create mode 100644arch/arm/mach-alpine/alpine_machine.c
create mode 100644arch/arm/mach-alpine/platsmp.c
You need to add an entry in the MAINTAINERS file, so that get_maintainers.pl script
adds the right guys for patch impacting your machine.
Br,
Maxime