Skip to content

cm-fx6 updates for Utilite

Stefano Babic u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest posting 2/20 of 4 patches 0 repliesNew
  2. v2 posting 1/20 of 4 patches 0 repliesSuperseded

Patches in v2 posting 2/2 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH V2 0/4] cm-fx6 updates for Utilite
Quoted 39 lines · Nikita Kiryanov
Quoted 38 lines · Igor Grinberg

Hi Stefano,

Quoted 34 lines · Stefano Babic
Quoted 22 lines · Nikita Kiryanov

This series provides a fix necessary for early models of Utilite, a miniature desktop based on CM-FX6. It implements a dynamic modification to the device tree that is necessary for mmc boot.

Cc Stefano Babic <[email protected]>
Cc Igor Grinberg <[email protected]>

Changes in V2:
- New patch: compulab: eeprom: propagate error value in read_mac_addr()
- s/BOARD_PRODUCT_NAME_*/PRODUCT_NAME_*
- rewrote cl_eeprom_get_product_name() to take a buffer parameter and added documentation
- #define USDHC3_PATH instead of const variable usdhc3_path
- Do not update device tree on eeprom read failures in a more explicit way

Nikita Kiryanov (4):
compulab: eeprom: select i2c bus when querying for board rev
compulab: eeprom: propagate error value in read_mac_addr()
compulab: eeprom: add support for obtaining product name
arm: mx6: cm-fx6: modify device tree for old revisions of utilite

Quoted 6 lines
 board/compulab/cm_fx6/cm_fx6.c | 22 +++++++++++++++++++++-
 board/compulab/cm_t35/cm_t35.c |  2 +-
 board/compulab/common/eeprom.c | 40 ++++++++++++++++++++++++++++++++++++----
 board/compulab/common/eeprom.h | 10 ++++++++--
 4 files changed, 66 insertions(+), 8 deletions(-)

Applied to u-boot-imx, thanks !

Quoted 7 lines
Quoted 4 lines

IMO, this was a bit early...
We haven't received any answer from Nikita yet. I tend to think that he is preparing a newer version. Nikita?

Yes, I was planning to submit a new version. Since V2 is already in mainline though, I guess I'll submit a followup patch.

Ok, thanks - I missed that a new version was in preparation, sorry for that.

Regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================