Bring up rk3036 uboot
Get series with b4
b4 am [email protected]Versions newest first
- v5 Latest0 of 21 patches 0 repliesNew
Patches in v5 No applies recorded yet
None of the 21 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.
Cover letter [U-Boot] [PATCH v5 00/21] Bring up rk3036 uboot
Quoted 18 lines · Sjoerd Simons
Quoted 17 lines · Stefan Roese
Hi Sjoerd,
Quoted 14 lines · Sjoerd Simons
Quoted 1 line · Simon Glass
+a few others who have submitted patches
I suspect this is unrelated to the 3036 bringup, but at the moment i
can't build the 3288 firefly SPL smaller then 32k :( (iotw small enoug
to be used as an SD card image). The image ends up being about 250 bytes too big..Playing silly games with nm, it seems the big items are the sdram bringup-code, mmc core/drivers and ofcourse (vs)printf related functions (followed by a long tail of smaller things).
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Seems like a bit of dieting is required ;)
Did you try using the new tiny-printf implementation (
CONFIG_USE_TINY_PRINTF)? It should save you ~2.5KiB.Thanks for the tip, a first quick tried unfortunately shows that both the gpio uclass and the mmc core support fail to build when that option is enabled (missing sprintf, and various
_strtoXXfunctiosn).
Ah, right. This new option has not been enabled on a SPL-DM platform yet. Something might be missing there.
Quoted 2 lines
Probably worth a try in fixing that though given the pontential savings.
Yes, this should hopefully not be too hard to fix.
Thanks,
Stefan