Skip to content

arm64: hisilicon: add support hip06 d03 board

Wei Xu linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] arm64: hisilicon: add support hip06 d03 board

Hi Kefeng,

Quoted 14 lines · Kefeng Wang

Add initial dts for Hip06 D03 board and documentation.

The Hip06 soc has same cpu topology compared with Hip05, four clusters and each cluster has quard Cortex-A57, but with different IO part, like HNS, SAS and PCI, they are all upgraded. There are also not same in ITS, MBIGEN and SMMU, etc.

Note, there is no serial, because the soc use LPC uart, the serial node is not needed.

Kefeng Wang (2):
arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
Documentation: arm64: Add Hisilicon Hip06 D03 dts binding

Quoted 8 lines
 .../bindings/arm/hisilicon/hisilicon.txt           |  20 +-
 arch/arm64/boot/dts/hisilicon/Makefile             |   4 +-
 arch/arm64/boot/dts/hisilicon/hip06-d03.dts        |  34 +++
 arch/arm64/boot/dts/hisilicon/hip06.dtsi           | 307 +++++++++++++++++++++
 4 files changed, 356 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hip06-d03.dts
 create mode 100644 arch/arm64/boot/dts/hisilicon/hip06.dtsi

Thanks!
Applied both to the hisilicon soc tree.

Best Regards,
Wei

Read the cover letter in its thread