Skip to content

ARM: dts: Add operating-points-v2 tables for TI platforms

Dave Gerlach linux-arm-kernel linux-devicetree linux-omap linux-pm 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest posting 2/20 of 3 patches 0 repliesNew
  2. v2 posting 1/23 patches 0 repliesSuperseded
  3. v10 of 8 patches 0 repliesSuperseded

Patches in v2 posting 2/2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/3] ARM: dts: Add operating-points-v2 tables for TI platforms

Hi Tony,

Quoted 8 lines · Tony Lindgren

Hi,

Quoted 5 lines · Dave Gerlach

Hi,
This is v2 of the series to add operating-points-v2 tables for am335x, am437x, dra7, and am57x platforms, but really just updates the already merged v1 found here [1].

Quoted 9 lines
Quoted 4 lines

It seems v1 was merged without the binding being finalized so this series just updates the nodes that are already present in order to work with the new bindings coming in v2 of the ti-cpufreq driver series which will follow shortly.

Assuming this will have to wait based on what you mentioned about am335x cpufreq regression. I guess you'll instead send few patches to revert?

Correct, these should not be merged, I will be sending a fixup series until this series is ready.

I needed to resend the ti-cpufreq driver at [2] to get a response about the dt binding and other updates Viresh asked for and sent this to update the merged nodes so they would work with the driver. But the driver has not been merged yet, so in order to re-enable the previously existing cpufreq support on those platforms I must revert three patches from v1 [1] of this series that got merged, which I will send.

I also found that 7694ca6e1d6f ("cpufreq: omap: Use generic platdev driver") which went in v4.6-rc1 had already broken the existing cpufreq support on am335x and dra7xx, so it's been missing for some time. I can send a patch fixing that as well but I will need to remove it once the ti-cpufreq driver in [2] below gets merged as that driver must create the cpufreq-dt platform device instead of cpufreq-dt-platdev. So I will send a series that can fix cpufreq until ti-cpufreq is ready which will give us better support for more OPPs on am335x, am437x (which has no implementation today), and dra7xx.

Regards,
Dave

[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2016-May/430205.html
[2] http://www.spinics.net/lists/devicetree/msg141152.html

Quoted 19 lines

Regards,

Tony

Quoted 15 lines

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-May/430205.html

Dave Gerlach (3):
ARM: dts: am33xx: Change operating-points-v2 table to am3352 version
ARM: dts: am4372: Change operating-points-v2 table to am4372 version
ARM: dts: dra7: Change operating-points-v2 table to dra7 version

  arch/arm/boot/dts/am33xx.dtsi | 2 +-
  arch/arm/boot/dts/am4372.dtsi | 2 +-
  arch/arm/boot/dts/dra7.dtsi   | 2 +-
  3 files changed, 3 insertions(+), 3 deletions(-)

--
2.9.0

Read the cover letter in its thread