Skip to content

ARM: at91: Allow running SPL with DTB append

Eugen.Hristev at microchip.com u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 2 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/2] ARM: at91: Allow running SPL with DTB append
Quoted 37 lines · Gregory CLEMENT

Hello,

a few months ago I submitted a small series allowing to run SPL with DTB append. Indeed according to the linker BSS section was all the time separated for SPL but the symbol SPL_SEPARATE_BSS was only enabled on some boards.

In this v2 the changes are:
- add reviewed-by Stefan Roese <[email protected]>
- modify a new defconfig sama5d3_xplained_nandflash_defconfig

Thanks,

Gregory

Gregory CLEMENT (2):
ARM: at91: Enable SPL_SEPARATE_BSS by default
configs: atmel: cleanup CONFIG_SPL_SEPARATE_BSS

  arch/arm/Kconfig                                | 1 +
  configs/gardena-smart-gateway-at91sam_defconfig | 1 -
  configs/sama5d27_som1_ek_mmc1_defconfig         | 1 -
  configs/sama5d27_som1_ek_mmc_defconfig          | 1 -
  configs/sama5d27_som1_ek_qspiflash_defconfig    | 1 -
  configs/sama5d27_wlsom1_ek_mmc_defconfig        | 1 -
  configs/sama5d27_wlsom1_ek_qspiflash_defconfig  | 1 -
  configs/sama5d2_icp_mmc_defconfig               | 1 -
  configs/sama5d2_xplained_emmc_defconfig         | 1 -
  configs/sama5d2_xplained_mmc_defconfig          | 1 -
  configs/sama5d2_xplained_qspiflash_defconfig    | 1 -
  configs/sama5d3_xplained_mmc_defconfig          | 1 -
  configs/sama5d3xek_mmc_defconfig                | 1 -
  configs/sama5d4_xplained_mmc_defconfig          | 1 -
  configs/sama5d4ek_mmc_defconfig                 | 1 -
  15 files changed, 1 insertion(+), 14 deletions(-)
Quoted 3 lines

--
2.26.2

Applied to u-boot-atmel/master,
Thanks!