Meson8b: add support for the Endless Mini EC-100
Get series with b4
b4 am [email protected]Versions newest first
- v2 Latest0 of 5 patches 0 repliesNew
Patches in v2 No applies recorded yet
None of the 5 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [PATCH v2 0/5] Meson8b: add support for the Endless Mini EC-100
Quoted 15 lines · Martin Blumenstingl
This series adds support for the "Endless Mini" grapefruit-sized mini PC from Endless Mobile, Inc. The internal name of this device is EC-100 (this can be found for example in the GPL kernel tree which is based on Amlogic's 3.10 kernel: [0]).
The board is using a Meson8b (S805) SoC with various peripherals. The biggest difference compared to boards which are based on Amlogic's reference designs is that this board comes with an embedded micro- controller called "EC" which makes the system LED pulse during boot and allows powering off the board. It also comes with a 10/100 Mbit/s Ethernet port and one USB host port.
There are two variants:
- 2GB RAM, 32GB storage, 802.11bgn and Bluetooth 4.0
- 1GB RAM, 24GB storage, neither wifi nor Bluetooth
Quoted 3 lines
This series contains support for the new board as well as supporting patches for the new vendor prefix and the pin definitions in
meson8b.dtsiso various peripherals can be enabled.
Applied to v4.20/dt,
Thanks,
Kevin