arm64: marvell: add support for the slave CP in Armada 8K
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/2] arm64: marvell: add support for the slave CP in Armada 8K
Hi Thomas,
Quoted 10 lines · Thomas Petazzoni
Hello,
The following set of two patches add support for the slave CP HW block found in the Armada 8K SoCs. As a reminder:
- Armada 7K is an SoC with one AP and one CP. The AP is the part that contains the CPU, cache and a few basic I/Os. The CP is the part that contains most interesting I/Os (PCIe, SATA, USB, Ethernet, etc.)
Quoted 4 lines
- Armada 8K is an SoC with one AP and two CPs.
This set of patches add support for the second CP found in Armada 8K, also called the "slave CP110".
Both patches applied on mvebu/dt64
Thanks,
Gregory
Quoted 21 lines
Thanks,
Thomas
Thomas Petazzoni (2):
arm64: dts: marvell: add description for the slave CP110 in Armada 8K
arm64: dts: marvell: add description for the Armada 8040 dev boardarch/arm64/boot/dts/marvell/Makefile | 1 + arch/arm64/boot/dts/marvell/armada-8020.dtsi | 1 + .../{armada-8020.dtsi => armada-8040-db.dts} | 109 ++++++++- arch/arm64/boot/dts/marvell/armada-8040.dtsi | 1 + .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 246 +++++++++++++++++++++ 5 files changed, 351 insertions(+), 7 deletions(-) copy arch/arm64/boot/dts/marvell/{armada-8020.dtsi => armada-8040-db.dts} (55%) create mode 100644 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsiSignature · 1 line
2.7.4
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com