Skip to content

MXC: Add NAND support for i.MX31

Magnus Lilja u-boot 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest posting 2/20 of 3 patches 0 repliesNew
  2. v2 posting 1/23 patches 0 repliesSuperseded
  3. v13 patches 0 repliesSuperseded

Patches in v2 posting 2/2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/3] MXC: Add NAND support for i.MX31

Hi

I received no further comments on these patches after posting v2 (the NAND part is ACK-ed by Scott Wood). Could someone pull these? I applied them to the current u-boot tip without any problems.

Regads, Magnus

Magnus Lilja skrev:

Quoted 28 lines

Hi all,

This series adds NAND support for i.MX31 using the mxc_nand driver that was added for i.MX27. The same NAND flash controller is used in i.MX31.

Tested on i.MX31 Litekit. MAKEALL ARM11&ARM9 performed.

Changes since v1: Changed variable name in mxc_nand.c.

Regards, Magnus

Magnus Lilja (3):
MX31: Add struct definition for clock control module in i.MX31.
mxc_nand: Update driver to work with i.MX31.
MX31: Activate NAND support for i.MX31 Litekit board.

 drivers/mtd/nand/mxc_nand.c           |   34 ++++++++++++++++++++++++++--
 include/asm-arm/arch-mx31/mx31-regs.h |   39 +++++++++++++++++++++++++++++++++
 include/configs/imx31_litekit.h       |   10 ++++++++
 3 files changed, 80 insertions(+), 3 deletions(-)

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Read the cover letter in its thread