ARM zynq changes

Hi,

I am sending ARM zynq changes.
This series is based on FPGA changes I have sent
http://lists.denx.de/pipermail/u-boot/2014-April/178204.html
(There is small dependency on some patches).
My expectation is that fpga series will go to Tom's tree first.

Thanks,
Michal

Michal Simek (12):
ARM: zynq: Fix sparse warnings in slcr.c
ARM: zynq: Fix sparse warning in ddrc.c
ARM: zynq: Remove sparse warnings
ARM: zynq: Do not use half memory size for ECC case
ARM: zynq: Call zynq board_init() in SPL
ARM: zynq: slcr: Fix incorrect commentary
ARM: zynq: Setup correct slcr_lock value
ARM: zynq: Fix building SPL without FPGA support
ARM: zynq: Extend kernel image size to 60MB
ARM: zynq: Add MIO detection code
ARM: zynq: ehci: Added USB host driver support
ARM: zynq: Extend maximum number of command arguments

Mike Looijmans (1):
ARM: zynq: Fix bootmode mask

Siva Durga Prasad Paladugu (5):
ARM: zynq: Added efuse status register base address
ARM: zynq: Added USB host support for zynq boards
ARM: zynq: Enable the FAT write capability
ARM: zynq: Move USB/SD/MMC common FAT configs
ARM: zynq: Enable EXT4 configs

 arch/arm/cpu/armv7/zynq/cpu.c              |  13 ++++
 arch/arm/cpu/armv7/zynq/ddrc.c             |   5 +-
 arch/arm/cpu/armv7/zynq/slcr.c             |  87 ++++++++++++++++++++++--
 arch/arm/cpu/armv7/zynq/spl.c              |   7 ++
 arch/arm/include/asm/arch-zynq/hardware.h  |  13 +++-
 arch/arm/include/asm/arch-zynq/sys_proto.h |   2 +
 board/xilinx/zynq/board.c                  |  25 ++++---
 drivers/usb/host/Makefile                  |   1 +
 drivers/usb/host/ehci-zynq.c               | 104 +++++++++++++++++++++++++++++
 include/configs/zynq-common.h              |  32 +++++++--
 include/configs/zynq_zc70x.h               |   1 +
 include/configs/zynq_zed.h                 |   1 +
 12 files changed, 268 insertions(+), 23 deletions(-)
 create mode 100644 drivers/usb/host/ehci-zynq.c

--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140425/e8101c5e/attachment.pgp>