Skip to content

Add SNVS clock gating and SNVS node for DT

Sanchayan Maity linux-arm-kernel lkml 1 version Applied

Status from this message: Applied both, thanks.

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyApplied

Changes in v1 from the cover letter

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2ARM: imx: clk-vf610: Add clock for SNVSarch/arm/mach-imx/clk-vf610.c include/dt-bindings/clock/vf610-clock.h+4 -10 replies
2/2ARM: dts: vfxxx: Add SNVS nodearch/arm/boot/dts/vf500.dtsi arch/arm/boot/dts/vfxxx.dtsi+18 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Add SNVS clock gating and SNVS node for DT

The following patch set adds support for clock gating of the SNVS peripheral required on the Vybrid platform. Also adds a device tree node for this peripheral.

This patchset was send before along with the patch which had clock changes to the rtc-snvs driver. Since these could not be merged then, till the changes for rtc-snvs landed in the mainline, I am sending them anew as the changes are now in the for-next branch
https://git.kernel.org/cgit/linux/kernel/git/shawnguo/linux.git/log/?h=for-next

The initial discussion can be found at the below links for the earlier set of patches:

[RESEND] v2:
https://lkml.org/lkml/2014/12/3/23

v2:
https://lkml.org/lkml/2014/11/7/295

v1:
https://lkml.org/lkml/2014/9/26/492

Sanchayan Maity (2):
ARM: imx: clk-vf610: Add clock for SNVS
ARM: dts: vfxxx: Add SNVS node

 arch/arm/boot/dts/vf500.dtsi            |    4 ++++
 arch/arm/boot/dts/vfxxx.dtsi            |   14 ++++++++++++++
 arch/arm/mach-imx/clk-vf610.c           |    2 ++
 include/dt-bindings/clock/vf610-clock.h |    3 ++-
 4 files changed, 22 insertions(+), 1 deletion(-)
Signature · 1 line
1.7.9.5