Skip to content

Add Actions Semi Owl family sirq support

Cristian Ciocaltea linux-arm-kernel linux-devicetree lkml 4 versions – Applied

Status from this message: Applied to irq/irqchip-next, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v7 Latest3 patches 3 repliesApplied
  2. v63 patches 6 repliesSuperseded
  3. v53 patches 12 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v43 patches4 repliesSuperseded

Changes in v7 from the cover letter

- Added Co-developed-by tags to the driver patch according to Marc's review

Patches in v7 Applied

#Subject and filesSizeRepliesApplied
1/3dt-bindings: interrupt-controller: Add Actions SIRQ controller bindingDocumentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml+65 -02 replies
2/3irqchip: Add Actions Semi Owl SIRQ controllerdrivers/irqchip/Makefile drivers/irqchip/irq-owl-sirq.c+360 -00 replies
3/3MAINTAINERS: Add entries for Actions Semi Owl SIRQ controllerMAINTAINERS+2 -00 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/3R-b
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v7 thread

Cover letter [PATCH v7 0/3] Add Actions Semi Owl family sirq support

This patch series adds support for the external interrupt controller (SIRQ) found in the Actions Semi Owl family of SoC's (S500, S700 and S900). The controller handles up to 3 external interrupt lines through dedicated SIRQ pins.

This is a rework of the patch series submitted some time ago by Parthiban Nallathambi:
https://lore.kernel.org/lkml/[email protected]/

Please note I have dropped, for the moment, the S700 related patches since I do not own a compatible hardware for testing. I'm using instead an S500 SoC based board for which I have already provided the initial support:
https://lore.kernel.org/lkml/[email protected]/

Additionally, I have taken the authorship for the driver patch, considering the original code has been already modified to a great extent and I'm firmly committed to maintaining it in the long run.

The SIRQ controller support is a prerequisite of the upcoming MFD driver for the Actions Semi ATC260x PMICs.

Thanks and regards,
Cristi

Changes in v7:
- Added Co-developed-by tags to the driver patch according to Marc's review

Changes in v6:
- Integrated binding doc related feedback from Rob and Marc
- Updated cover letter to handle the authorship issue indicated by Mani
- Rebased patch series on v5.9-rc4

Changes in v5:
- Integrated Marc's review (more details in the driver patch changelog)
- Rebased patch series on v5.9-rc1

Changes in v4:
- Simplified the DTS structure:
* dropped 'actions,sirq-shared-reg' node, now the differentiation between SoC variants is handled via the compatible property
* dropped 'actions,sirq-reg-offset', now controller base address in DTS points to SIRQ0 register, so no additional information is required for S500 and S700, while for S900 SoC the offsets of SIRQ1 and SIRQ2 regs are provided by the driver
* 'actions,ext-irq-range' was replaced with 'actions,ext-interrupts', an array of the GIC interrupts triggered by the controller
- Fixed wrong INTC_EXTCTL_TYPE_MASK definition
- Removed redundant irq_fwspec checks in owl_sirq_domain_alloc()
- Improved error handling in owl_sirq_of_init()
- Added yaml binding document
- Dropped S700 related DTS patches for lack of testing hardware:
* arm64: dts: actions: Add sirq node for Actions Semi S700
* arm64: dts: actions: s700-cubieboard7: Enable SIRQ
- Updated MAINTAINERS
- Rebased patchset on kernel v5.8
- Cosmetic changes
* Ordered include statements alphabetically
* Added comment to owl_sirq_set_type() describing conversion of falling edge or active low signals
* Replaced IRQF_TRIGGER_* with corresponding IRQ_TYPE_* variants
* Ensured data types and function naming are consistent regarding the 'owl_sirq' prefix

Changes in v3 (Parthiban Nallathambi):
- Set default operating frequency to 24MHz
- Falling edge and Low Level interrupts translated to rising edge and high level
- Introduced common function with lock handling for register read and write
- Used direct GIC interrupt number for interrupt local hwirq and finding offset using DT entry (range) when registers are shared
- Changed irq_ack to irq_eoi
- Added translation method for irq_domain_ops
- Clearing interrupt pending based on bitmask for edge triggered
- Added pinctrl definition for sirq for cubieboard7. This depends on,
https://lore.kernel.org/patchwork/patch/1012859/

Changes in v2 (Parthiban Nallathambi):
- Added SIRQ as hierarchical chip

        GIC <----> SIRQ <----> External interrupt controller/Child devices

- Device binding updates with vendor prefix
- Register sharing handled globally and common init sequence/data for all actions SoC family

Cristian Ciocaltea (3):
dt-bindings: interrupt-controller: Add Actions SIRQ controller binding
irqchip: Add Actions Semi Owl SIRQ controller
MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller

 .../actions,owl-sirq.yaml                     |  65 ++++
 MAINTAINERS                                   |   2 +
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-owl-sirq.c                | 359 ++++++++++++++++++
 4 files changed, 427 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
 create mode 100644 drivers/irqchip/irq-owl-sirq.c
Signature · 1 line
2.28.0