arm64: zynqmp: Update description for Kria

Hi,

over last couple of months dt bindings have been updated but dtbs didn't reflect it that's why I have created this series to match description used in U-Boot to be able to switch to OF_UPSTREAM for ZynqMP platforms. There are still small missing part regarding usb peer hub and MTD layouts for other boards.
The rest should be in sync already.

Thanks,
Michal

Michal Simek (9):
arm64: zynqmp: Align nvmem node with dt schema
arm64: zynqmp: Use fpga-region as node name
arm64: zynqmp: Add missing description for efuses
arm64: zynqmp: Describe USB wakeup interrupt
arm64: zynqmp: Describe OCM controller
arm64: zynqmp: Remove address/size-cells from ams node
arm64: zynqmp: Add compatible string for kv260
arm64: zynqmp: Add description for ina260 on kv260
arm64: zynqmp: Add support for K26 rev2 boards

Tejas Bhumkar (1):
arm64: zynqmp: Disable Tri-state for SDIO

Vishal Patel (1):
arm64: zynqmp: Add pwm-fan node and fix ttc0 pwm-cells property

Vishal Sagar (1):
arm64: zynqmp: Describe DisplayPort connector for Kria

 .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 19 +++-
 .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 41 ++++++++-
 .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts    | 19 +++-
 .../boot/dts/xilinx/zynqmp-smk-k26-revA.dts   |  8 +-
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 91 ++++++++++++++++---
 5 files changed, 156 insertions(+), 22 deletions(-)

2.40.1