Skip to contentSkip to conversation

MRTG and IPP2P - Iptables

LARTC Leandro Andrade Travaglia 2 participants 2 messages Mar 25, 2004 – Mar 26, 2004

lore
Share & tools
lore
#0 lore raw

Hi all,

I'm trying to use MRTG to monitor and make graphs of my P2P traffic. I'm using IPP2P 0.5c - Iptables 1.2.9
The IPP2P was configured like this:

example three:

01# iptables -t mangle -A PREROUTING -p tcp -j CONNMARK --restore-mark 02# iptables -t mangle -A PREROUTING -p tcp -m mark ! --mark 0 -j ACCEPT 03# iptables -t mangle -A PREROUTING -p tcp -m ipp2p --edk -j MARK --set-mark 1 04# iptables -t mangle -A PREROUTING -p tcp -m ipp2p --dc -j MARK --set-mark 2 05# iptables -t mangle -A PREROUTING -p tcp -m ipp2p --gnu -j MARK --set-mark 3 06# iptables -t mangle -A PREROUTING -p tcp -m ipp2p --kazaa -j MARK --set-mark 4 07# iptables -t mangle -A PREROUTING -p tcp -m ipp2p --apple -j MARK --set-mark 5 08# iptables -t mangle -A PREROUTING -p tcp -j CONNMARK --save-mark

09# iptables -t mangle -A POSTROUTING -m mark --mark 1 -j ACCEPT
10# iptables -t mangle -A POSTROUTING -m mark --mark 2 -j ACCEPT
11# iptables -t mangle -A POSTROUTING -m mark --mark 3 -j ACCEPT
12# iptables -t mangle -A POSTROUTING -m mark --mark 4 -j ACCEPT
13# iptables -t mangle -A POSTROUTING -m mark --mark 5 -j ACCEPT
I have only added the --soul and --bit networks, with mark 6 and 7.......
And the command iptables -t mangle -L -n -v -x is working fine.... SHowing all my P2P traffic of each different network :

iptables -t mangle -L -n -v -x
Chain PREROUTING (policy ACCEPT 31197 packets, 5559838 bytes)
pkts bytes target prot opt in out source destination

   33059  9516328 CONNMARK   tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           CONNMARK restore
   12001  5091047 ACCEPT     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           MARK match !0x0
     153    32656 MARK       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           ipp2p v0.5c --edk MARK set 0x1
       0        0 MARK       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           ipp2p v0.5c --dc MARK set 0x2
       0        0 MARK       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           ipp2p v0.5c --gnu MARK set 0x3
      57    24854 MARK       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           ipp2p v0.5c --kazaa MARK set 0x4
       0        0 MARK       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           ipp2p v0.5c --apple MARK set 0x5
       2      154 MARK       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           ipp2p v0.5c --soul MARK set 0x6
       0        0 MARK       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           ipp2p v0.5c --bit MARK set 0x7
   20324  4360417 CONNMARK   tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           CONNMARK save

Chain INPUT (policy ACCEPT 16997 packets, 3182031 bytes)
pkts bytes target prot opt in out source destination

Chain FORWARD (policy ACCEPT 26178 packets, 7467918 bytes)
pkts bytes target prot opt in out source destination

Chain OUTPUT (policy ACCEPT 17072 packets, 3252442 bytes)
pkts bytes target prot opt in out source destination

Chain POSTROUTING (policy ACCEPT 31071 packets, 5596377 bytes)
pkts bytes target prot opt in out source destination

   11106  4799465 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           MARK match 0x1
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           MARK match 0x2
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           MARK match 0x3
     657   269207 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           MARK match 0x4
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           MARK match 0x5
     436    60031 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           MARK match 0x6
       0        0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           MARK match 0x7

MRTG is already working fine, monitoring my eth0 and eth1 traffic. Also my CPU / Memory usage......

Can someone help me ?

Best regards,
LEANDRO TRAVAGLIA

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.639 / Virus Database: 408 - Release Date: 22/3/2004

#1 lore raw
Quoted 7 lines

09# iptables -t mangle -A POSTROUTING -m mark --mark 1 -j ACCEPT 10# iptables -t mangle -A POSTROUTING -m mark --mark 2 -j ACCEPT 11# iptables -t mangle -A POSTROUTING -m mark --mark 3 -j ACCEPT 12# iptables -t mangle -A POSTROUTING -m mark --mark 4 -j ACCEPT 13# iptables -t mangle -A POSTROUTING -m mark --mark 5 -j ACCEPT I have only added the --soul and --bit networks, with mark 6 and 7....... And the command iptables -t mangle -L -n -v -x is working fine.... SHowing

So you need MRTG working on the packet/bytecounters of POSTROUTING? I'm not familiar with MTRG but a simple shell script should at least be able to extract the numbers. I'd be glad to see any solution to this!

Quoted 1 line

0.0.0.0/0 ipp2p v0.5c --soul MARK set 0x6

Well, one hint: IPP2P will mark some soulseek packets but the downloads won't get marked. You can use IPP2P to drop soulseek packets thus making soulseek stop working but marking (and shaping) will not work properly.

Regards,

Signature · 6 lines
+++ NEU bei GMX und erstmalig in Deutschland: TÜV-geprüfter Virenschutz +++
100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/