system requirements
Hi,
I have the following problem with cbq.init script.
I try to limit the output traffic from all my 254 IPs to 4Kb/s, but when I start the script the ping time from one of the shaped hosts drastically increases.
0,2-0,7 milisecs without shaper and 1500-2000 milisecs with. I though it might be the low CPU power or something. I'm running on 500MHz Intel Celeron. Anyone have experienced a similar problem?
Here is the entry file I use for one of the IPs:
DEVICE=eth1,10Mbit,1Mbit
RATE=40Kbit
WEIGHT=4Kbit
PRIO=5
RULE=213.169.58.111,
where eth1 is the internet interface.