PARAMs
buddies,
im newbie to traffic control and been studying htb scripts (examples), I wonder how to use params, this line below for ex.:
--------
$TC filter add dev $WAN parent 1: protocol ip prio 10 u32 match ip protocol 6 0xff match u 8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33 flowid 1:$VIP
--------
I understood it is adding a filter to go to class $VIP in device wan (eth0 in my case)........
I also understant that "match ip protocol 6" <-- 6 = TCP - I see that in /etc/protocols, but why that 0xff after it ?
can someone explain the rest of the params ? I donnot understant those params like prio 10, u32, match u16 0x0000 0xffc0, etc !
thanks in advance
James
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · James Lista
buddies,
<snip>
Quoted 7 lines
I understood it is adding a filter to go to class $VIP in device wan (eth0 in my case)........
I also understant that "match ip protocol 6" <-- 6 = TCP - I see that in/etc/protocols, but why that0xffafter it ?can someone explain the rest of the params ? I donnot understant those params like prio 10, u32, match u16
0x00000xffc0, etc !
This is the only documentation I have been able to track down in my travels about the u32 classifier[1]. I don't know why there's an 0xff after match 'ip protocol 6'. You get the same thing for '[d|s]port 53 0xff' matches, too. I think those keywords are syntactic sugar.
[1] http://lartc.org/howto/lartc.adv-filter.html
Signature · 8 lines
Jason Boxman Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida http://edseek.com/ - Linux and FOSS stuff _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · James Lista
buddies,
im newbie to traffic control and been studying htb scripts (examples), I wonder how to use params, this line below for ex.:
--------
$TC filter add dev $WAN parent 1: protocol ip prio 10 u32 match ip protocol 60xffmatch u 80x050x0fat 0 match u160x00000xffc0at 2 match u80x100xffat 33 flowid 1:$VIP
--------
Quoted 7 lines
I understood it is adding a filter to go to class $VIP in device wan (eth0 in my case)........
I also understant that "match ip protocol 6" <-- 6 = TCP - I see that in/etc/protocols, but why that0xffafter it ?can someone explain the rest of the params ? I donnot understant those params like prio 10, u32, match u16
0x00000xffc0, etc !
Start reading and reading and reading and more reading:
http://www.lartc.org
http://www.docum.org
Stef
Signature · 6 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/