Skip to contentSkip to conversation

Why my image isn't boot?

U-Boot-Users Zhao Hongda 1 participant 1 message Apr 9, 2003

lore
Share & tools
lore
#0 lore raw

I want it run from flash, but if I use "loadb 0x00100000", after transfer
the uImage, "md 0x00100000" shows that flash data is wrong, what should I do?
Hongda Zhao

Quoted 30 lines

----- Original Message -----
From: <[email protected]>
To: "Zhao Hongda" <[email protected]>
Sent: Tuesday, April 08, 2003 5:23 AM
Subject: Re: [U-Boot-Users] Why my image isn't boot?

Quoted 5 lines
Quoted 5 lines

I use the u-boot cvs source,
linux-2.4.19 kernel, arm-linux patch, and xscale patch. arm-linux-gcc 3.0 as complier,lubbock(pxa250) as platform.

arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux

linux.bin

Quoted 2 lines
Quoted 2 lines

gzip -9 linux.bin
mkimage -A arm -O linux -T kernel -C gzip -a 0xa0008000 -e

0xa0008000 -n

Quoted 13 lines
Quoted 7 lines

"Linux Kernel Image" -d linux.bin.gz uImage
then under u-boot:

    =>loadb 0xa0008000 (send the uImage)
    =>go 0xa0008000
    start the application at 0xa0008000
    <hang>

You try to start a compressed kernel from RAM?

Rick