PCI->APIC IRQ transform -> 267 ?
I'm getting this with 2.4.27 (SMP):
PCI: Using IRQ router PIIX [8086/25a1] at 00:1f.0PCI->APIC IRQ transform: (B0,I29,P0) -> 16PCI->APIC IRQ transform: (B0,I29,P1) -> 19PCI->APIC IRQ transform: (B0,I29,P3) -> 23PCI->APIC IRQ transform: (B0,I31,P0) -> 18PCI->APIC IRQ transform: (B0,I31,P0) -> 18PCI->APIC IRQ transform: (B0,I31,P1) -> 17PCI->APIC IRQ transform: (B2,I4,P0) -> 27PCI->APIC IRQ transform: (B3,I4,P0) -> 267PCI->APIC IRQ transform: (B3,I5,P0) -> 25PCI->APIC IRQ transform: (B4,I4,P0) -> 267PCI->APIC IRQ transform: (B4,I4,P1) -> 267PCI->APIC IRQ transform: (B4,I6,P0) -> 26PCI->APIC IRQ transform: (B4,I6,P1) -> 27PCI->APIC IRQ transform: (B5,I9,P0) -> 17PCI->APIC IRQ transform: (B5,I10,P0) -> 19
The devices which are being assigned 267 are Ethernet ports and return
error SIOCSIFFLAGS when I try and configure them with ifconfig. Devices (B4,I6,P0) & (B4,I6,P1) (also Ethernet ports) can be configured with ifconfig but don't receive any interrupts (according to /proc/interrupts) and don't work. Devices (B5,I10,P0) & (B3,I5,P0) (more Ethernet ports) work fine.
I've tried various combinations of ACPI, APIC & hyperthreading
disabled & enabled but without any luck and I've run out of ideas for debugging this. Can anyone help?
The board is a Supermicro P4SCT+II with a 3.2GHz P4 (with
hyperthreading). The devices which are being affected are both PCI-X Ethernet cards:
Intel PRO/1000MT 4-port Ethernet card (PCI-ID 8086:101D Rev 1)
Intel PRO/100S 2-port Ethernet card (PCI-ID 8086:1229 Rev D)
I've attached some dmesg info and an lspci -v.
Robert
Quoted 3 lines · Robert Clark
I'm getting this with 2.4.27 (SMP):
PCI: Using IRQ router PIIX [8086/25a1] at 00:1f.0
...
Quoted 1 line
PCI->APICIRQ transform: (B3,I4,P0) -> 267
this is from pcibios_fixup_irqs() which is called only when ACPI is disabled. Let me know if you still have trouble with a kernel built with CONFIG_ACPI=y. Also, it would be good to know if other versions of the kernel are known to work, or if they all fail on this box.
thanks,
-Len
Quoted 4 lines · Len Brown
Quoted 2 lines · Robert Clark
I'm getting this with 2.4.27 (SMP):
Quoted 8 lines
Quoted 1 line
PCI: Using IRQ router PIIX [8086/25a1] at 00:1f.0
...
Quoted 1 line
PCI->APICIRQ transform: (B3,I4,P0) -> 267this is from
pcibios_fixup_irqs()which is called only when ACPI is disabled. Let me know if you still have trouble with a kernel built withCONFIG_ACPI=y. Also, it would be good to know if other versions of the kernel are known to work, or if they all fail on this box.
Thanks - that sheds some light on things. I've had some success with
2.6.8 and thought it was a problem with the 2.4 series, but I've now recompiled 2.4.27 with CONFIG_ACPI and it does work.
Am I right in thinking that without CONFIG_ACPI, 2.4.27 simply trusts
the BIOS to set up ACPI? If so, I should talk to Supermicro as it sounds like it might be a BIOS problem.
Thanks,
Robert