High load
HI all,
I have one compaq server with 4 Intel(R) Xeon cpu's (3.1GHZ), 4GB RAM. OS:- Fedora Core 2
Kernel:- 2.6.14
when i compile a new kernel, during th compilation process load goes very high (10 and little above). i can not understand why does this happen, while if i compile the same kernel on my P4 machine with 1GB ram and 3GHZ, it remains under 3.
can somebody tell me what is wrong?
-
Signature · 6 lines
Regards Aniruddh Singh System Administrator Monster.com India Pvt. Ltd. FC 23, Block B, 1st Floor, Sector 16A Film City Noida 201301 U.P.
Quoted 6 lines · Aniruddh Singh
HI all,
I have one compaq server with 4 Intel(R) Xeon cpu's (3.1GHZ), 4GB RAM. OS:- Fedora Core 2
Kernel:- 2.6.14
Quoted 7 lines
when i compile a new kernel, during th compilation process load goes very high (10 and little above). i can not understand why does this happen, while if i compile the same kernel on my P4 machine with 1GB ram and 3GHZ, it remains under 3.
can somebody tell me what is wrong?
-
Sounds suspiciously like DMA is not working on your drives. Check your dmesg logs and what hdparm returns.
Con
Hi,
hdparm -tT /dev/cciss/c0d0p2 returns the following
/dev/cciss/c0d0p2:
Timing buffer-cache reads: 2660 MB in 2.00 seconds = 1329.92 MB/sec
Timing buffered disk reads: 248 MB in 3.00 seconds = 82.55 MB/sec
if i try to hdparm -I /dev/cciss/c0d0 it returns/dev/cciss/c0d0:
operation not supported on SCSI disks
Do i need to installed sdparm and modify some settings?
Quoted 19 lines · Con Kolivas
Quoted 6 lines · Aniruddh Singh
HI all,
I have one compaq server with 4 Intel(R) Xeon cpu's (3.1GHZ), 4GB RAM. OS:- Fedora Core 2
Kernel:- 2.6.14Quoted 7 lines
when i compile a new kernel, during th compilation process load goes very high (10 and little above). i can not understand why does this happen, while if i compile the same kernel on my P4 machine with 1GB ram and 3GHZ, it remains under 3.
can somebody tell me what is wrong?
-Sounds suspiciously like DMA is not working on your drives. Check your dmesg logs and what hdparm returns.
Con
Signature · 6 lines
Regards Aniruddh Singh System Administrator Monster.com India Pvt. Ltd. FC 23, Block B, 1st Floor, Sector 16A Film City Noida 201301 U.P.
Hi,
there is a raid 0 and raid controller is Smart Array 64xx (rev 01)
hdparm -tT /dev/cciss/c0d0p2 returns the following
/dev/cciss/c0d0p2:
Timing buffer-cache reads: 2660 MB in 2.00 seconds = 1329.92 MB/sec
Timing buffered disk reads: 248 MB in 3.00 seconds = 82.55 MB/sec
if i try to hdparm -I /dev/cciss/c0d0 it returns/dev/cciss/c0d0:
operation not supported on SCSI disks
Quoted 24 lines · Con Kolivas
Quoted 6 lines · Aniruddh Singh
HI all,
I have one compaq server with 4 Intel(R) Xeon cpu's (3.1GHZ), 4GB RAM. OS:- Fedora Core 2
Kernel:- 2.6.14Quoted 7 lines
when i compile a new kernel, during th compilation process load goes very high (10 and little above). i can not understand why does this happen, while if i compile the same kernel on my P4 machine with 1GB ram and 3GHZ, it remains under 3.
can somebody tell me what is wrong?
-Sounds suspiciously like DMA is not working on your drives. Check your dmesg logs and what hdparm returns.
Con
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 6 lines
Regards Aniruddh Singh System Administrator Monster.com India Pvt. Ltd. FC 23, Block B, 1st Floor, Sector 16A Film City Noida 201301 U.P.
Quoted 5 lines · Aniruddh Singh
Hi,
there is a raid 0 and raid controller is Smart Array 64xx (rev 01)
hdparm -tT
/dev/cciss/c0d0p2returns the following
for measuring IO performance, I'd recommend tiobench over hdparm any day ( http://tiobench.sf.net )
Quoted 9 lines · Arjan van de Ven
Quoted 5 lines · Aniruddh Singh
Hi,
there is a raid 0 and raid controller is Smart Array 64xx (rev 01)
hdparm -tT
/dev/cciss/c0d0p2returns the followingfor measuring IO performance, I'd recommend tiobench over hdparm any day ( http://tiobench.sf.net )
i will do it, can you please tell me why load goes high when i compile kernel (10 and above)
Quoted 2 lines
Signature · 6 lines
Regards Aniruddh Singh System Administrator Monster.com India Pvt. Ltd. FC 23, Block B, 1st Floor, Sector 16A Film City Noida 201301 U.P.
Quoted 6 lines · Aniruddh Singh
Quoted 5 lines · Arjan van de Ven
Quoted 4 lines · Aniruddh Singh
Hi,
there is a raid 0 and raid controller is Smart Array 64xx (rev 01)
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
hdparm -tT
/dev/cciss/c0d0p2returns the followingfor measuring IO performance, I'd recommend tiobench over hdparm any day ( http://tiobench.sf.net )
i will do it, can you please tell me why load goes high when i compile kernel (10 and above)
thats really odd, unless you do a "make -j", in which case of course it's expected ;)
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
for measuring IO performance, I'd recommend tiobench over hdparm any day ( http://tiobench.sf.net )
i will do it, can you please tell me why load goes high when i compile kernel (10 and above)
thats really odd, unless you do a "make -j", in which case of course it's expected ;)
yes i always use make -j option ??
Signature · 6 lines
Regards Aniruddh Singh System Administrator Monster.com India Pvt. Ltd. FC 23, Block B, 1st Floor, Sector 16A Film City Noida 201301 U.P.
Quoted 10 lines · On Sat, 07 Jan 2006 11:17:09 +0530 Aniruddh Singh wrote:
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
for measuring IO performance, I'd recommend tiobench over hdparm any day ( http://tiobench.sf.net )
i will do it, can you please tell me why load goes high when i compile kernel (10 and above)
thats really odd, unless you do a "make -j", in which case of course it's expected ;)
yes i always use make -j option ??
With or without a following integer?
See 'make help':
-j [N], --jobs[=N] Allow N jobs at once; infinite jobs with no arg.
so use make -j N to limit the number of makes/compiles etc. or use 'make -j' to go ballistic.
---
~Randy
Quoted 6 lines · Randy.Dunlap
Quoted 4 lines · On Sat, 07 Jan 2006 11:17:09 +0530 Aniruddh Singh wrote:
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
for measuring IO performance, I'd recommend tiobench over hdparm any day ( http://tiobench.sf.net )
Quoted 8 lines
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
i will do it, can you please tell me why load goes high when i compile kernel (10 and above)
thats really odd, unless you do a "make -j", in which case of course it's expected ;)
yes i always use make -j option ??
With or without a following integer?
make -j8, machine has 4 processor
Quoted 14 lines
See 'make help':
-j [N], --jobs[=N] Allow N jobs at once; infinite jobs with no arg.so use make -j N to limit the number of makes/compiles etc. or use 'make -j' to go ballistic.
---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 6 lines
Regards Aniruddh Singh System Administrator Monster.com India Pvt. Ltd. FC 23, Block B, 1st Floor, Sector 16A Film City Noida 201301 U.P.