IOAPIC (?) problems on a VIA K8T800 system
Randomly, my VIA K8T800-based system will stop receiving all interrupts (the columns in /proc/interrupts stop incrementing) from either the SATA controller or all of the UHCI controllers (IRQs 16 or 18, respectively).
AFAICT, booting with noapic makes this go away, but since I can't reliably reproduce it, I don't know for sure if that in fact works around the problem.
Removing and then reloading the driver module (or using sysfs to unbind/bind the devices) makes the problem temporarily go away.
This is with the latest FC5 kernel (kernel-2.6.16-1.2096_FC5) on an SMP AMD64 system, but it's been doing this occasionally on every kernel I've used for quite some time now.
Signature · 1 line
Nicholas Miell <[email protected]>