Skip to contentSkip to conversation

IOAPIC (?) problems on a VIA K8T800 system

DISCUSSION Nicholas Miell 1 participant 1 message Apr 28, 2006

lore
Share & tools
lore
#0 lore raw

Randomly, my VIA K8T800-based system will stop receiving all interrupts (the columns in /proc/interrupts stop incrementing) from either the SATA controller or all of the UHCI controllers (IRQs 16 or 18, respectively).

AFAICT, booting with noapic makes this go away, but since I can't reliably reproduce it, I don't know for sure if that in fact works around the problem.

Removing and then reloading the driver module (or using sysfs to unbind/bind the devices) makes the problem temporarily go away.

This is with the latest FC5 kernel (kernel-2.6.16-1.2096_FC5) on an SMP AMD64 system, but it's been doing this occasionally on every kernel I've used for quite some time now.

Signature · 1 line
Nicholas Miell <[email protected]>