OMAP3: Remove unused board-types
PATCH v4 2/3 OMAP3: Remove unused board-types
The board-types defined in struct omap3_sysinfo seem to be unused. The function display_board_info() is passed board type as an argument; which is ignored.
This patch removes all uses of board-type, related definitions and functions.
Signed-off-by Sanjeev Premi <[email protected]>
--- board/omap3/beagle/beagle.h | 2 -- board/omap3/evm/evm.h | 2 -- board/omap3/overo/overo.h | 2 -- board/omap3/pandora/pandora.h | 2 -- board/omap3/zoom1/zoom1.h | 2 -- cpu/arm_cortexa8/omap3/sys_info.c | 17 ----------------- include/asm-arm/arch-omap3/omap3.h | 8 -------- include/asm-arm/arch-omap3/sys_proto.h | 3 --- 8 files changed, 0 insertions(+), 38 deletions(-)
board/omap3/beagle/beagle.h +0 -2
@@ -24,8 +24,6 @@#define _BEAGLE_H_const omap3_sysinfo sysinfo = { -SDP_3430_V1 , -SDP_3430_V2 ,DDR_STACKED ,"OMAP3 Beagle board" , #if defined(CONFIG_ENV_IS_IN_ONENAND)
board/omap3/evm/evm.h +0 -2
@@ -24,8 +24,6 @@#define _EVM_H_const omap3_sysinfo sysinfo = { -OMAP3EVM_V1 , -OMAP3EVM_V2 ,DDR_DISCRETE ,"OMAP3 EVM board" , #if defined(CONFIG_ENV_IS_IN_ONENAND)
board/omap3/overo/overo.h +0 -2
@@ -24,8 +24,6 @@#define _OVERO_H_const omap3_sysinfo sysinfo = { -SDP_3430_V1 , -SDP_3430_V2 ,DDR_STACKED ,"Gumstix Overo board" , #if defined(CONFIG_ENV_IS_IN_ONENAND)
board/omap3/pandora/pandora.h +0 -2
@@ -24,8 +24,6 @@#define _PANDORA_H_const omap3_sysinfo sysinfo = { -SDP_3430_V1 , -SDP_3430_V2 ,DDR_STACKED ,"OMAP3 Pandora" ,"NAND" ,
board/omap3/zoom1/zoom1.h +0 -2
@@ -28,8 +28,6 @@#define _BOARD_ZOOM1_H_const omap3_sysinfo sysinfo = { -SDP_3430_V1 , -SDP_3430_V2 ,DDR_STACKED ,"OMAP3 Zoom MDK Rev 1" ,"NAND" ,
cpu/arm_cortexa8/omap3/sys_info.c +0 -17
@@ -130,23 +130,6 @@ u32 get_sdr_cs_offset(u32 cs)return offset; } -/*********************************************************************** -* get_board_type() - get board type based on current production stats. -* - NOTE-1-: 2 I2C EEPROMs will someday be populated with proper info. -* when they are available we can get info from there. This should -* be correct of all known boards up until today. -* - NOTE-2- EEPROMs are populated but they are updated very slowly. To -* avoid waiting on them we will use ES version of the chip to get info. -* A later version of the FPGA migth solve their speed issue. -************************************************************************/ -u32 get_board_type (void ) -{ -if (get_cpu_rev () ==CPU_3430_ES2 ) -return sysinfo.board_type_v2; -else -return sysinfo.board_type_v1; -} -/*************************************************************************** * get_gpmc0_base() - Return current address hardware will be * fetching from. The below effectively gives what is correct, its a bit
include/asm-arm/arch-omap3/omap3.h +0 -8
@@ -177,14 +177,6 @@ typedef struct gpio {#define WIDTH_8BIT 0x0000#define WIDTH_16BIT 0x1000/* bit pos for 16 bit in gpmc */ -/* SDP definitions according to FPGA Rev. Is this OK?? */ -#define SDP_3430_V1 0x1 -#define SDP_3430_V2 0x2 - -/* EVM definitions */ -#define OMAP3EVM_V1 0x1 -#define OMAP3EVM_V2 0x2 -/* I2C power management companion definitions */ #define PWRMGT_ADDR_ID1 0x48#define PWRMGT_ADDR_ID2 0x49
include/asm-arm/arch-omap3/sys_proto.h +0 -3
@@ -22,8 +22,6 @@#define _SYS_PROTO_H_ typedef struct { - u32 board_type_v1; - u32 board_type_v2; u32 mtype; char *board_string; char *nand_string;
@@ -46,7 +44,6 @@ u32 get_sysboot_value(void);u32 is_gpmc_muxed (void );u32 get_gpmc0_type (void );u32 get_gpmc0_width (void ); -u32 get_board_type (void );u32 get_sdr_cs_size (u32 );u32 get_sdr_cs_offset (u32 );u32 is_running_in_sdram (void );
Signature · 1 line
1.6.2.1