Warning: unable to open an initial console
Well, according to the research I did looking for my initial console error message on google it seems it is not a kernel compile issue but rather an issue with the kernel needing to find /dev/console before udev is run to create the various device entries in /dev
To work around this I created an initrd file for my kernel even though I have all the needed disk device drivers and filesystems drivers in my kernel. Once I did that and put it into place my new kernel booted up just fine.
-----Original Message-----
Quoted 18 lines
From: "Steven A. DuChene" <[email protected]>
Sent: Sep 30, 2009 1:05 PM
To: [email protected]
Subject: Warning: unable to open an initial consoleHmm, I tried various combonations of turning off the framebuffer support all together and then turning it back on with various drivers (nvidia or vesa vga) but still I get the same message about "Warning: unable to open an initial console."
Anything else I should be looking at besides the graphics support part of the drivers section of the kernel config?
Again this is a fairly standard PCChips A13G motherboard with NVidia chipset and AMD Athlon 3600+ CPU that works fine with the regular distro supplied FC9 kernel (2.6.25-14.fc9.x86_64) and I have the
x86_64version of FC9 installed.