docs: correct gpio.txt typos
Quoted 8 lines · Randy Dunlap
From: Dominik D. Geyer <[email protected]>
Subject: correct gpio.txt typosCorrected sysfs gpio chip node name and fixed punctuation.
Signed-off-by Dominik D. Geyer <[email protected]>Signed-off-by Randy Dunlap <[email protected]>Cc David Brownell <[email protected]>
Ack.
Quoted 29 lines
--- Documentation/gpio.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)Documentation/gpio.txt +2
-2@@ -380,7 +380,7 @@ rare; use gpiochip_remove() when it is u Most often a gpio_chip is part of an instance-specific structure with state not exposed by the GPIO interfaces, such as addressing, power management, -and more. Chips such as codecs will have complex non-GPIO state, +and more. Chips such as codecs will have complex non-GPIO state. Any debugfs dump method should normally ignore signals which haven't been requested as GPIOs. They can use gpiochip_is_requested(), which returns@@ -531,7 +531,7 @@ and have the following read/write attrib This file exists only if the pin can be configured as an interrupt generating input pin. -GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the +GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the controller implementing GPIOs starting at #42) and have the following read-only attributes:Signature · 1 line
--