Skip to contentSkip to conversation

APM821xx: Add bluestone board support

PATCH Superseded tmarri at apm.com 2 participants 2 messages Sep 28, 2010

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

PATCH v6 2/2 APM821xx: Add bluestone board support

From: Tirumala Marri <[email protected]>

Add support code for bluestone board wth APM821XX processor based. This patch includes early board init, misc init, configure EBC, initializes UIC, MAKEALL, board.cfg and MAINTAINERS file.

Signed-off-by Tirumala R Marri <tmarri at apm.com

---
V5:
* MAKEALL change is not needed anymore
* CONFIG_SYS_NOR_CS is not used anywhere.
* CONFIG_PHY_RESET_R is not used anywhere
V6:
* Correcting indentation.
---

---
 MAINTAINERS                      |    4 +
 board/amcc/bluestone/Makefile    |   52 +++++++++++
 board/amcc/bluestone/bluestone.c |  111 +++++++++++++++++++++++
 board/amcc/bluestone/config.mk   |   40 +++++++++
 board/amcc/bluestone/init.S      |   60 +++++++++++++
 boards.cfg                       |    1 +
 include/configs/bluestone.h      |  178 ++++++++++++++++++++++++++++++++++++++
 7 files changed, 446 insertions(+), 0 deletions(-)
MAINTAINERS +4 -0
index 0c6ce2b..e20055f 100644
@@ -500,6 +500,10 @@ Detlev Zundel <[email protected]>
 
 	inka4x0		MPC5200
 
+Tirumala Marri <[email protected]>
+
+	bluestone       APM821XX
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
board/amcc/bluestone/Makefile new file +52 -0

52 lines not on this page · raw message

board/amcc/bluestone/bluestone.c new file +111 -0

111 lines not on this page · raw message

board/amcc/bluestone/config.mk new file +40 -0
new file mode 100644
index 0000000..e2194e4
@@ -0,0 +1,40 @@
+#
+# Copyright (c) 2010, Applied Micro Circuits Corporation
+# Author: Tirumala R Marri <[email protected]>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Applied Micro APM821XX Evaluation board.
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
+endif
board/amcc/bluestone/init.S new file +60 -0

60 lines not on this page · raw message

boards.cfg +1 -0
index 0fe1c89..c83ec85 100644
@@ -184,6 +184,7 @@ t3corp		powerpc	ppc4xx
 zeus		powerpc	ppc4xx
 acadia		powerpc	ppc4xx		-		amcc
 bamboo		powerpc	ppc4xx		-		amcc
+bluestone	powerpc ppc4xx		-		amcc
 bubinga		powerpc	ppc4xx		-		amcc
 ebony		powerpc	ppc4xx		-		amcc
 katmai		powerpc	ppc4xx		-		amcc
include/configs/bluestone.h new file +178 -0

178 lines not on this page · raw message

Signature · 1 line
1.6.1.rc3
#1 lore raw

PATCH v6 2/2 APM821xx: Add bluestone board support

Dear tmarri at apm.com,

Quoted 7 lines · In message <[email protected]> you wrote:

From: Tirumala Marri <[email protected]>

Add support code for bluestone board wth APM821XX processor based. This patch includes early board init, misc init, configure EBC, initializes UIC, MAKEALL, board.cfg and MAINTAINERS file.

...

include/configs/bluestone.h line 2

Quoted 5 lines
include/configs/bluestone.h new file +2 -0
@@ -0,0 +1,178 @@
+/*
+ * bluestone.h - configuration for Blouestone (APM821XX)

s/Blouestone/Bluestone/ ?

...

Quoted 1 line
include/configs/bluestone.h new file +1 -0
+#define SPD_EEPROM_ADDRESS	{0x53, 0x51}	/* SPD i2c spd addresses */

...

Quoted 3 lines
include/configs/bluestone.h new file +3 -0
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed            */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8 >> 1)

...

Quoted 1 line

+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52

Please replace the "(0xa8 >> 1)" by a plain 0x54 like youdo for the other I2C addresses as well. No need to make reading more difficult than necessary.

Thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Real computer scientists don't comment their  code.  The  identifiers
are so long they can't afford the disk space.