removed ad-hoc cmdline default
PATCH 1/1 removed ad-hoc cmdline default
Loongson builds have an ad-hoc cmdline default of "console=ttyS0,115200 root=/dev/hda1". These settings come from vendor (I remember builds from Lemote branch requiring a "console=tty" override in order to get a working console).
At least on my Yeeloong, they're particularly useless: there's no (external) serial port, and the IDE drive is now recognised as /dev/ sda.
I recommend removing them. They make sense from a distributor/vendor POV but otherwise are just a nuissance.
Remove ad-hoc cmdline settings.
arch/mips/loongson/common/cmdline.c +0 -5
@@ -44,10 +44,5 @@ void __init prom_init_cmdline(void)strcat (arcs_cmdline," " ); } -if ((strstr (arcs_cmdline,"console=" )) ==NULL ) -strcat (arcs_cmdline," console=ttyS0,115200" ); -if ((strstr (arcs_cmdline,"root=" )) ==NULL ) -strcat (arcs_cmdline," root=/dev/hda1" ); -prom_init_machtype (); }
Quoted 11 lines · Robert Millan
Loongson builds have an ad-hoc cmdline default of "console=ttyS0,115200 root=/dev/hda1". These settings come from vendor (I remember builds from Lemote branch requiring a "console=tty" override in order to get a working console).
At least on my Yeeloong, they're particularly useless: there's no (external) serial port, and the IDE drive is now recognised as
/dev/sda.I recommend removing them. They make sense from a distributor/vendor POV but otherwise are just a nuissance.
Makes sense to me but I'm not an authoritative expert for all Loongson platforms so I'm going to wait for comments for a few days before I'm going to apply this.
Generally forcing options like this is just a bad idea.
Ralf
Applied - finally!
Ralf