Skip to contentSkip to conversation

drm/i915: the PCH reference clocks are global, so don't clobber unconditionally

PATCH Applied Jesse Barnes 2 participants 2 messages Feb 4, 2011 – Feb 7, 2011

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: the PCH reference clocks are global, so don't clobber unconditionally

The PCH can drive several reference clocks simultaneously, and needs to with multiple display configurations. So we can't just clobber the existing state everytime we set a mode, we need to take into account what the other CRTCs are doing at the time.

Doing so fixes an issue where you'd lose the LVDS display at boot if you had an LVDS+DP config.

[updated: init bools and check CRTC status correctly]
---
 drivers/gpu/drm/i915/intel_display.c |  123 +++++++++++++++++++++-------------
 1 files changed, 77 insertions(+), 46 deletions(-)
drivers/gpu/drm/i915/intel_display.c +77 -46
index fec84f4..d777038 100644
@@ -4520,6 +4520,81 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 	return dev_priv->lvds_use_ssc && i915_panel_use_ssc;
 }
 
+static void intel_update_dref(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+	struct drm_crtc *crtc;
+	u32 temp;
+	bool lvds_on = false, edp_on = false, pch_edp_on = false, other_on = false;
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		crtc = encoder->base.crtc;
+
+		if (!crtc || !crtc->enabled)
+			continue;
+
+		switch (encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			lvds_on = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			edp_on = true;
+			if (!pch_edp_on)
+				pch_edp_on = intel_encoder_is_pch_edp(&encoder->base);
+			break;
+		default:
+			other_on = true;
+			break;
+		}
+	}
+
+	/*XXX BIOS treats 16:31 as a mask for 0:15 */
+
+	temp = I915_READ(PCH_DREF_CONTROL);
+
+	/* First clear the current state for output switching */
+	temp &= ~DREF_SSC1_ENABLE;
+	temp &= ~DREF_SSC4_ENABLE;
+	temp &= ~DREF_SUPERSPREAD_SOURCE_MASK;
+	temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+	temp &= ~DREF_SSC_SOURCE_MASK;
+	temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+	I915_WRITE(PCH_DREF_CONTROL, temp);
+
+	POSTING_READ(PCH_DREF_CONTROL);
+	udelay(200);
+
+	if ((lvds_on || edp_on) && intel_panel_use_ssc(dev_priv)) {
+		temp |= DREF_SSC_SOURCE_ENABLE;
+		if (edp_on) {
+			if (!pch_edp_on) {
+				/* Enable CPU source on CPU attached eDP */
+				temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+			} else {
+				/* Enable SSC on PCH eDP if needed */
+				temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
+			}
+			I915_WRITE(PCH_DREF_CONTROL, temp);
+		}
+		if (!dev_priv->display_clock_mode)
+			temp |= DREF_SSC1_ENABLE;
+	}
+
+	if (other_on && dev_priv->display_clock_mode)
+		temp |= DREF_NONSPREAD_CK505_ENABLE;
+	else if (other_on) {
+		temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+		if (edp_on && !pch_edp_on)
+			temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+	}
+
+	I915_WRITE(PCH_DREF_CONTROL, temp);
+	POSTING_READ(PCH_DREF_CONTROL);
+	udelay(200);
+}
+
 static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			       struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode,
@@ -4745,52 +4820,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	 * PCH B stepping, previous chipset stepping should be
 	 * ignoring this setting.
 	 */
-	if (HAS_PCH_SPLIT(dev)) {
-		/*XXX BIOS treats 16:31 as a mask for 0:15 */
-
-		temp = I915_READ(PCH_DREF_CONTROL);
-
-		/* First clear the current state for output switching */
-		temp &= ~DREF_SSC1_ENABLE;
-		temp &= ~DREF_SSC4_ENABLE;
-		temp &= ~DREF_SUPERSPREAD_SOURCE_MASK;
-		temp &= ~DREF_NONSPREAD_SOURCE_MASK;
-		temp &= ~DREF_SSC_SOURCE_MASK;
-		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
-		I915_WRITE(PCH_DREF_CONTROL, temp);
-
-		POSTING_READ(PCH_DREF_CONTROL);
-		udelay(200);
-
-		if ((is_lvds || has_edp_encoder) &&
-		    intel_panel_use_ssc(dev_priv)) {
-			temp |= DREF_SSC_SOURCE_ENABLE;
-			if (has_edp_encoder) {
-				if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
-					/* Enable CPU source on CPU attached eDP */
-					temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
-				} else {
-					/* Enable SSC on PCH eDP if needed */
-					temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
-				}
-				I915_WRITE(PCH_DREF_CONTROL, temp);
-			}
-			if (!dev_priv->display_clock_mode)
-				temp |= DREF_SSC1_ENABLE;
-		} else {
-			if (dev_priv->display_clock_mode)
-				temp |= DREF_NONSPREAD_CK505_ENABLE;
-			else
-				temp |= DREF_NONSPREAD_SOURCE_ENABLE;
-			if (has_edp_encoder &&
-			    !intel_encoder_is_pch_edp(&has_edp_encoder->base))
-				temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
-		}
-
-		I915_WRITE(PCH_DREF_CONTROL, temp);
-		POSTING_READ(PCH_DREF_CONTROL);
-		udelay(200);
-	}
+	if (HAS_PCH_SPLIT(dev))
+		intel_update_dref(dev_priv);
 
 	if (IS_PINEVIEW(dev)) {
 		fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
Signature · 1 line
1.7.2.3
Applied
#1 lore raw

Re: [PATCH] drm/i915: the PCH reference clocks are global, so dont clobber unconditionally

Quoted 7 lines · Jesse Barnes

The PCH can drive several reference clocks simultaneously, and needs to with multiple display configurations. So we can't just clobber the existing state everytime we set a mode, we need to take into account what the other CRTCs are doing at the time.

Doing so fixes an issue where you'd lose the LVDS display at boot if you had an LVDS+DP config.

This fixes the warning, but sadly the U160 still does not work correctly. A step in the right direction, we now have VGA!

Applied to -next, thanks.
-Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre