ASoC: sgtl5000: Fix warning due to the lack of REGULATOR_CHANGE_VOLTAGE
Subsystems (3)
Fabio Estevam
maintainerPATCH v2 1/1 ASoC: sgtl5000: Fix warning due to the lack of REGULATOR_CHANGE_VOLTAGE
Fix the following warning during kernel boot:
0-000a: 850 <--> 1600 mV at 1200 mV normal 0-000a: Voltage range but no REGULATOR_CHANGE_VOLTAGE
Signed-off-by Fabio Estevam <[email protected]>
---
Changes since v1: Keep the voltage constant
sound/soc/codecs/sgtl5000.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
sound/soc/codecs/sgtl5000.c +2 -2
@@ -84,8 +84,8 @@ static struct regulator_consumer_supply ldo_consumer[] = {static struct regulator_init_data ldo_init_data = { .constraints = { - .min_uV =850000 , - .max_uV =1600000 , + .min_uV =1200000 , + .max_uV =1200000 , .valid_modes_mask =REGULATOR_MODE_NORMAL , .valid_ops_mask =REGULATOR_CHANGE_STATUS , },
Signature · 1 line
1.7.1
Mark Brown
AppliedQuoted 4 lines · Fabio Estevam
Fix the following warning during kernel boot:
0-000a: 850 <--> 1600 mV at 1200 mV normal 0-000a: Voltage range but no
REGULATOR_CHANGE_VOLTAGE
Applied, thanks.