ALSA: ASoC: cs4271: add support for AMUTEB=BMUTEC feature
Subsystems (4)
PATCH v2 1/1 ALSA: ASoC: cs4271: add support for AMUTEB=BMUTEC feature
The CS4271 has a feature to sync its analog mute flags, so one mute circuitry can be used for both channels.
Give users access to this feature with a new DT property and a flag in the platform data.
Signed-off-by Daniel Mack <[email protected]>
Cc Alexander Sverdlin <[email protected]>
--- Documentation/devicetree/bindings/sound/cs4271.txt | 2 ++ include/sound/cs4271.h | 1 + sound/soc/codecs/cs4271.c | 21 ++++++++++++++++++--- 3 files changed, 21 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/sound/cs4271.txt +2 -0
@@ -18,6 +18,8 @@ Optional properties: - reset-gpio: a GPIO spec to define which pin is connected to the chip's !RESET pin + - cirrus,amuteb-eq-bmutec: When given, the Codec's AMUTEB=BMUTEC flag + is enabled. Examples:
include/sound/cs4271.h +1 -0
@@ -19,6 +19,7 @@struct cs4271_platform_data {int gpio_nreset;/* GPIO driving Reset pin, if any */ +int amutec_eq_bmutec:1 ;/* flag to enable AMUTEC=BMUTEC */ };#endif /* __CS4271_H */
sound/soc/codecs/cs4271.c +18 -3
@@ -474,15 +474,25 @@ static int cs4271_probe(struct snd_soc_codec *codec)struct cs4271_platform_data *cs4271plat = codec->dev->platform_data;int ret;int gpio_nreset = -EINVAL ; +int amutec_eq_bmutec =0 ;#ifdef CONFIG_OF -if (of_match_device (cs4271_dt_ids, codec->dev)) +if (of_match_device (cs4271_dt_ids, codec->dev)) { gpio_nreset =of_get_named_gpio (codec->dev->of_node,"reset-gpio" ,0 ); + +if (!of_get_property (codec->dev->of_node, +"cirrus,amutec-eq-bmutec" ,NULL )) + amutec_eq_bmutec =1 ; + }#endif -if (cs4271plat &&gpio_is_valid (cs4271plat->gpio_nreset)) - gpio_nreset = cs4271plat->gpio_nreset; +if (cs4271plat) { +if (gpio_is_valid (cs4271plat->gpio_nreset)) + gpio_nreset = cs4271plat->gpio_nreset; + + amutec_eq_bmutec = cs4271plat->amutec_eq_bmutec; + }if (gpio_nreset >=0 )if (gpio_request (gpio_nreset,"CS4271 Reset" ))
@@ -528,6 +538,11 @@ static int cs4271_probe(struct snd_soc_codec *codec)/* Power-up sequence requires 85 uS */ udelay (85 ); +if (amutec_eq_bmutec) +snd_soc_update_bits (codec,CS4271_MODE2 , +CS4271_MODE2_MUTECAEQUB , +CS4271_MODE2_MUTECAEQUB ); +return snd_soc_add_codec_controls (codec, cs4271_snd_controls,ARRAY_SIZE (cs4271_snd_controls)); }
Signature · 1 line
1.7.11.4
Mark Brown
AppliedQuoted 5 lines · Daniel Mack
The CS4271 has a feature to sync its analog mute flags, so one mute circuitry can be used for both channels.
Give users access to this feature with a new DT property and a flag in the platform data.
Applied, thanks.