buffer_is_zero / migration optimizations
v2 cover buffer_is_zero / migration optimizations
this is v2 of my patch series with various optimizations in zero buffer checking and migration tweaks.
hopefully properly threaded this time.
thanks especially to Eric Blake and Paolo Bonzini for their comments.
the patches can also be fetched from:git://github.com/plieven/qemu.git [branch migration_optimizations_v2]
v2:
- fix description, add trivial zero check and add asserts to buffer_find_nonzero_offset.
- add a constant for the unroll factor of buffer_find_nonzero_offset
- replace is_dup_page() by buffer_is_zero()
- added test results to xbzrle patch
- optimize descriptions
Have a nice weekend,
Peter
Peter Lieven (9):
move vector definitions to qemu-common.h
cutils: add a function to find non-zero content in a buffer
buffer_is_zero: use vector optimizations if possible
bitops: use vector algorithm to optimize find_next_bit()
migration: search for zero instead of dup pages
migration: add an indicator for bulk state of ram migration
migration: do not sent zero pages in bulk stage
migration: do not search dirty pages in bulk stage
migration: use XBZRLE only after bulk stage
arch_init.c | 62 +++++++++++++++---------------------------------- include/qemu-common.h | 26 +++++++++++++++++++++ util/bitops.c | 26 ++++++++++++++++++--- util/cutils.c | 47 +++++++++++++++++++++++++++++++++++++ 4 files changed, 115 insertions(+), 46 deletions(-)
Signature · 1 line
1.7.9.5
PATCH v2 1/9 move vector definitions to qemu-common.h
vector optimizations will now be used at various places not just in is_dup_page() in arch_init.c
this patch also adds a zero splat vector.
--- arch_init.c | 20 -------------------- include/qemu-common.h | 24 ++++++++++++++++++++++++ 2 files changed, 24 insertions(+), 20 deletions(-)
arch_init.c +0 -20
@@ -114,26 +114,6 @@ const uint32_t arch_type = QEMU_ARCH;#define RAM_SAVE_FLAG_CONTINUE 0x20#define RAM_SAVE_FLAG_XBZRLE 0x40 -#ifdef __ALTIVEC__ -#include <altivec.h> -#define VECTYPE vector unsigned char -#define SPLAT (p) vec_splat(vec_ld(0, p), 0) -#define ALL_EQ (v1, v2) vec_all_eq(v1, v2) -/* altivec.h may redefine the bool macro as vector type. -* Reset it to POSIX semantics. */ -#undef bool -#define bool _Bool -#elif defined __SSE2__ -#include <emmintrin.h> -#define VECTYPE __m128i -#define SPLAT (p) _mm_set1_epi8(*(p)) -#define ALL_EQ (v1, v2) (_mm_movemask_epi8(_mm_cmpeq_epi8(v1, v2)) == 0xFFFF) -#else -#define VECTYPE unsigned long -#define SPLAT (p) (*(p) * (~0UL / 255)) -#define ALL_EQ (v1, v2) ((v1) == (v2)) -#endif - static struct defconfig_file { const char *filename;
include/qemu-common.h +24 -0
@@ -442,4 +442,28 @@ int64_t pow2floor(int64_t value);int uleb128_encode_small (uint8_t *out,uint32_t n);int uleb128_decode_small (const uint8_t *in,uint32_t *n); +/* vector definitions */ +#ifdef __ALTIVEC__ +#include <altivec.h> +#define VECTYPE vector unsigned char +#define SPLAT (p) vec_splat(vec_ld(0, p), 0) +#define ZERO_SPLAT vec_splat(vec_ld(0, 0), 0) +#define ALL_EQ (v1, v2) vec_all_eq(v1, v2) +/* altivec.h may redefine the bool macro as vector type. +* Reset it to POSIX semantics. */ +#undef bool +#define bool _Bool +#elif defined __SSE2__ +#include <emmintrin.h> +#define VECTYPE __m128i +#define SPLAT (p) _mm_set1_epi8(*(p)) +#define ZERO_SPLAT _mm_setzero_si128() +#define ALL_EQ (v1, v2) (_mm_movemask_epi8(_mm_cmpeq_epi8(v1, v2)) == 0xFFFF) +#else +#define VECTYPE unsigned long +#define SPLAT (p) (*(p) * (~0UL / 255)) +#define ZERO_SPLAT 0x0UL +#define ALL_EQ (v1, v2) ((v1) == (v2)) +#endif +#endif
Signature · 1 line
1.7.9.5
Re: [Qemu-devel] [PATCHv2 1/9] move vector definitions to qemu-common.h
Quoted 10 lines · Peter Lieven
vector optimizations will now be used at various places not just in
is_dup_page()inarch_init.cthis patch also adds a zero splat vector.
Signed-off-by Peter Lieven <[email protected]>--- arch_init.c | 20 -------------------- include/qemu-common.h | 24 ++++++++++++++++++++++++ 2 files changed, 24 insertions(+), 20 deletions(-)
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
PATCH v2 2/9 cutils: add a function to find non-zero content in a buffer
In reply to Peter Lieven--- include/qemu-common.h | 2 ++ util/cutils.c | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+)
include/qemu-common.h +2 -0
@@ -362,6 +362,8 @@ size_t qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,size_t qemu_iovec_memset (QEMUIOVector *qiov,size_t offset,int fillc,size_t bytes); +#define BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR 8 +size_t buffer_find_nonzero_offset (const void *buf,size_t len);bool buffer_is_zero (const void *buf,size_t len);void qemu_progress_init (int enabled,float min_skip);
util/cutils.c +40 -0
@@ -143,6 +143,46 @@ int qemu_fdatasync(int fd) }/* +* Searches for an area with non-zero content in a buffer +* +* Attention! The len must be a multiple of 8 * sizeof(VECTYPE) +* and addr must be a multiple of sizeof(VECTYPE) due to +* restriction of optimizations in this function. +* +* The return value is the offset of the non-zero area rounded +* down to 8 * sizeof(VECTYPE). If the buffer is all zero +* the return value is equal to len. +*/ + +size_t buffer_find_nonzero_offset (const void *buf,size_t len) +{ +VECTYPE *p = (VECTYPE *)buf; +VECTYPE zero =ZERO_SPLAT ; +size_t i; + +assert (len % (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR + *sizeof (VECTYPE )) ==0 ); +assert (((uintptr_t ) buf) %sizeof (VECTYPE ) ==0 ); + +if (*((const long *) buf)) { +return 0 ; + } + +for (i =0 ; i < len /sizeof (VECTYPE ); i +=8 ) { +VECTYPE tmp0 = p[i+0 ] | p[i+1 ]; +VECTYPE tmp1 = p[i+2 ] | p[i+3 ]; +VECTYPE tmp2 = p[i+4 ] | p[i+5 ]; +VECTYPE tmp3 = p[i+6 ] | p[i+7 ]; +VECTYPE tmp01 = tmp0 | tmp1; +VECTYPE tmp23 = tmp2 | tmp3; +if (!ALL_EQ (tmp01 | tmp23, zero)) { +break ; + } + } +return i *sizeof (VECTYPE ); +} + +/* * Checks if a buffer is all zeroes * * Attention! The len must be a multiple of 4 * sizeof(long) due to
Signature · 1 line
1.7.9.5
Re: [Qemu-devel] [PATCHv2 2/9] cutils: add a function to find non-zero content in a buffer
Quoted 9 lines · Peter Lieven
Signed-off-by Peter Lieven <[email protected]>--- include/qemu-common.h | 2 ++ util/cutils.c | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+)+#define
BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR8
Good.
util/cutils.c int qemu_fdatasync(int fd) · line 164
Quoted 2 lines
util/cutils.c +2
-0+assert (len % (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR + *sizeof (VECTYPE )) ==0 );
Good use of it.
util/cutils.c int qemu_fdatasync(int fd) · line 171
Quoted 7 lines
util/cutils.c +7
-0+assert (((uintptr_t ) buf) %sizeof (VECTYPE ) ==0 ); + +if (*((const long *) buf)) { +return 0 ; + } + +for (i =0 ; i < len /sizeof (VECTYPE ); i +=8 ) {
Magic number 8, instead of reusing BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR.
util/cutils.c int qemu_fdatasync(int fd) · line 172
Quoted 1 line
util/cutils.c +1
-0+VECTYPE tmp0 = p[i+0 ] | p[i+1 ];
Indentation looks off, because you used TABs.
Spaces around binary operators (two instances of '+' per line).
util/cutils.c int qemu_fdatasync(int fd) · line 183
Quoted 11 lines
util/cutils.c +11
-0+VECTYPE tmp1 = p[i+2 ] | p[i+3 ]; +VECTYPE tmp2 = p[i+4 ] | p[i+5 ]; +VECTYPE tmp3 = p[i+6 ] | p[i+7 ]; +VECTYPE tmp01 = tmp0 | tmp1; +VECTYPE tmp23 = tmp2 | tmp3; +if (!ALL_EQ (tmp01 | tmp23, zero)) { +break ; + } + } +return i *sizeof (VECTYPE ); +}
Algorithm looks correct, but worth a respin to fix the appearance.
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Re: [Qemu-devel] [PATCHv2 2/9] cutils: add a function to find non-zero content in a buffer
Am 19.03.2013 um 16:54 schrieb Eric Blake <[email protected]>:
Quoted 9 lines · Peter Lieven
Quoted 8 lines
Signed-off-by Peter Lieven <[email protected]>---
include/qemu-common.h| 2 ++util/cutils.c| 40 ++++++++++++++++++++++++++++++++++++++++2 files changed, 42 insertions(+)
Quoted 8 lines
Quoted 1 line
+#define
BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR8Good.
util/cutils.c int qemu_fdatasync(int fd) · line 164
Quoted 2 lines
util/cutils.c +2
-0+assert (len % (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR + *sizeof (VECTYPE )) ==0 );Good use of it.
A question I had is if these asserts make the code slower? In case of all the 4k pages in RAM migration this could be significant.
Peter
Re: [Qemu-devel] [PATCHv2 2/9] cutils: add a function to find non-zero content in a buffer
Quoted 16 lines · Peter Lieven
Am 19.03.2013 um 16:54 schrieb Eric Blake <[email protected]>:
Quoted 13 lines · Peter Lieven
Quoted 9 lines
Signed-off-by Peter Lieven <[email protected]>---
include/qemu-common.h| 2 ++util/cutils.c| 40 ++++++++++++++++++++++++++++++++++++++++2 files changed, 42 insertions(+)+#define
BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR8Good.
Quoted 7 lines
Quoted 4 lines
util/cutils.c int qemu_fdatasync(int fd) · line 164
Quoted 2 lines
util/cutils.c +2
-0+assert (len % (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR + *sizeof (VECTYPE )) ==0 );Good use of it.
A question I had is if these asserts make the code slower? In case of all the 4k pages in RAM migration this could be significant.
Yes, it probably does slow things down when asserts are enabled. I'm not sure whether it is better to keep the code forcefully robust, or to rely on auditing all callers for properly obeying assumptions. Maybe you should wait for an opinion from one of the maintainers.
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Re: [Qemu-devel] [PATCHv2 2/9] cutils: add a function to find non-zero content in a buffer
Am 19.03.2013 um 17:43 schrieb Eric Blake <[email protected]>:
Quoted 22 lines · Peter Lieven
Quoted 21 lines
Am 19.03.2013 um 16:54 schrieb Eric Blake <[email protected]>:
Quoted 17 lines · Peter Lieven
Quoted 9 lines
Signed-off-by Peter Lieven <[email protected]>---
include/qemu-common.h| 2 ++util/cutils.c| 40 ++++++++++++++++++++++++++++++++++++++++2 files changed, 42 insertions(+)+#define
BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR8Good.
util/cutils.c int qemu_fdatasync(int fd) · line 164
Quoted 2 lines
util/cutils.c +2
-0+assert (len % (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR + *sizeof (VECTYPE )) ==0 );Good use of it.
Quoted 7 lines
Quoted 2 lines
A question I had is if these asserts make the code slower? In case of all the 4k pages in RAM migration this could be significant.
Yes, it probably does slow things down when asserts are enabled. I'm not sure whether it is better to keep the code forcefully robust, or to rely on auditing all callers for properly obeying assumptions. Maybe you should wait for an opinion from one of the maintainers.
If I follow your idea to add a can_use_buffer_find_nonzero_offset() function and add it to the description of the function my feeling is that we can drop the asserts. Actually we are always checking the same things twice.
Peter
Quoted 5 lines
Signature · 3 lines
-- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
PATCH v2 3/9 buffer_is_zero: use vector optimizations if possible
In reply to Peter Lievenperformance gain on SSE2 is approx. 20-25%. altivec is not tested. performance for unsigned long arithmetic is unchanged.
--- util/cutils.c | 7 +++++++ 1 file changed, 7 insertions(+)
util/cutils.c +7 -0
@@ -190,6 +190,13 @@ size_t buffer_find_nonzero_offset(const void *buf, size_t len)*/ bool buffer_is_zero (const void *buf,size_t len) { +/* use vector optimized zero check if possible */ +if (((uintptr_t ) buf) %sizeof (VECTYPE ) ==0 + && len % (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR + *sizeof (VECTYPE )) ==0 ) { +return buffer_find_nonzero_offset (buf, len)==len; + } +/* * Use long as the biggest available internal data type that fits into the * CPU register and unroll the loop to smooth out the effect of memory
Signature · 1 line
1.7.9.5
Re: [Qemu-devel] [PATCHv2 3/9] buffer_is_zero: use vector optimizations if possible
Quoted 14 lines · Peter Lieven
performance gain on SSE2 is approx. 20-25%. altivec is not tested. performance for unsigned long arithmetic is unchanged.
Signed-off-by Peter Lieven <[email protected]>--- util/cutils.c | 7 +++++++ 1 file changed, 7 insertions(+)util/cutils.c +0
-0
util/cutils.c size_t buffer_find_nonzero_offset(const void *buf, size_t len) · line 196
Quoted 7 lines
util/cutils.c +4
-0@@ -190,6 +190,13 @@ size_t buffer_find_nonzero_offset(const void *buf, size_t len)*/ bool buffer_is_zero (const void *buf,size_t len) { +/* use vector optimized zero check if possible */ +if (((uintptr_t ) buf) %sizeof (VECTYPE ) ==0 + && len % (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR + *sizeof (VECTYPE )) ==0 ) {
Is it worth factoring this check into something more reusable, by adding something like 'bool buffer_can_use_vectors(buf, len)' in patch 2/9?
util/cutils.c size_t buffer_find_nonzero_offset(const void *buf, size_t len) · line 197
Quoted 1 line
util/cutils.c +1
-0+return buffer_find_nonzero_offset (buf, len)==len;
Spaces around binary operators.
Is it worth rewriting this function into a simpler:
check up to (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR - 1) longs until we are aligned
check buffer_find_nonzero_offset on the aligned middle
check up to (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR - 1) longs at tail
instead of having two instances of code that can loop over the entire buffer? Otherwise, searching for zeros on an unaligned buffer will remain slower, even though the bulk of the search could still benefit from the vector operations.
util/cutils.c size_t buffer_find_nonzero_offset(const void *buf, size_t len) · line 202
Quoted 5 lines
util/cutils.c +2
-0+ } +/* * Use long as the biggest available internal data type that fits into the * CPU register and unroll the loop to smooth out the effect of memory
Your patch results in C99 declarations after statements; while we require C99, I'm not sure if qemu prefers to stick to the C89 style of declarations before statements.
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Re: [Qemu-devel] [PATCHv2 3/9] buffer_is_zero: use vector optimizations if possible
Am 19.03.2013 um 17:08 schrieb Eric Blake <[email protected]>:
Quoted 10 lines · Peter Lieven
Quoted 9 lines
performance gain on SSE2 is approx. 20-25%. altivec is not tested. performance for unsigned long arithmetic is unchanged.
Signed-off-by Peter Lieven <[email protected]>---
util/cutils.c| 7 +++++++1 file changed, 7 insertions(+)
Quoted 15 lines
util/cutils.c size_t buffer_find_nonzero_offset(const void *buf, size_t len) · line 196
Quoted 12 lines
util/cutils.c +4
-0@@ -190,6 +190,13 @@ size_t buffer_find_nonzero_offset(const void *buf, size_t len)*/ bool buffer_is_zero (const void *buf,size_t len) { +/* use vector optimized zero check if possible */ +if (((uintptr_t ) buf) %sizeof (VECTYPE ) ==0 + && len % (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR + *sizeof (VECTYPE )) ==0 ) {Is it worth factoring this check into something more reusable, by adding something like 'bool
buffer_can_use_vectors(buf, len)' in patch 2/9?
good idea!
Quoted 12 lines
util/cutils.c size_t buffer_find_nonzero_offset(const void *buf, size_t len) · line 197
Quoted 2 lines
util/cutils.c +1
-0+return buffer_find_nonzero_offset (buf, len)==len;Spaces around binary operators.
Is it worth rewriting this function into a simpler:
check up to (
BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR- 1) longs until we are aligned
checkbuffer_find_nonzero_offseton the aligned middle
check up to (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR- 1) longs at tail
Quoted 4 lines
instead of having two instances of code that can loop over the entire buffer? Otherwise, searching for zeros on an unaligned buffer will remain slower, even though the bulk of the search could still benefit from the vector operations.
i do not think that this is necessary as in all cases I know the buffers are aligned properly.
a) ram pages (4k)
b) block migration pages (1M)
c) bdrv sectors (512)
At least on x86_64 they have all 16-byte aligned addresses.
It would just add more branches to the case where the optimized version can be used maybe making it slower.
Peter
Quoted 10 lines
util/cutils.c size_t buffer_find_nonzero_offset(const void *buf, size_t len) · line 202
Quoted 6 lines
util/cutils.c +2
-0+ } +/* * Use long as the biggest available internal data type that fits into the * CPU register and unroll the loop to smooth out the effect of memory Your patch results in C99 declarations after statements; while we require C99, I'm not sure if qemu prefers to stick to the C89 style of declarations before statements.
the code was slower if I made the checks afterwards.
Peter
Quoted 5 lines
Signature · 3 lines
-- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Re: [Qemu-devel] [PATCHv2 3/9] buffer_is_zero: use vector optimizations if possible
In reply to Eric BlakeAm 19.03.2013 um 17:08 schrieb Eric Blake <[email protected]>:
Quoted 48 lines · Peter Lieven
Quoted 14 lines
performance gain on SSE2 is approx. 20-25%. altivec is not tested. performance for unsigned long arithmetic is unchanged.
Signed-off-by Peter Lieven <[email protected]>---
util/cutils.c| 7 +++++++1 file changed, 7 insertions(+)util/cutils.c +0
-0util/cutils.c size_t buffer_find_nonzero_offset(const void *buf, size_t len) · line 196
Quoted 7 lines
util/cutils.c +4
-0@@ -190,6 +190,13 @@ size_t buffer_find_nonzero_offset(const void *buf, size_t len)*/ bool buffer_is_zero (const void *buf,size_t len) { +/* use vector optimized zero check if possible */ +if (((uintptr_t ) buf) %sizeof (VECTYPE ) ==0 + && len % (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR + *sizeof (VECTYPE )) ==0 ) {Is it worth factoring this check into something more reusable, by adding something like 'bool
buffer_can_use_vectors(buf, len)' in patch 2/9?util/cutils.c size_t buffer_find_nonzero_offset(const void *buf, size_t len) · line 197
Quoted 1 line
util/cutils.c +1
-0+return buffer_find_nonzero_offset (buf, len)==len;Spaces around binary operators.
Is it worth rewriting this function into a simpler:
check up to (
BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR- 1) longs until we are aligned
checkbuffer_find_nonzero_offseton the aligned middle
check up to (BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR- 1) longs at tailinstead of having two instances of code that can loop over the entire buffer? Otherwise, searching for zeros on an unaligned buffer will remain slower, even though the bulk of the search could still benefit from the vector operations.
util/cutils.c size_t buffer_find_nonzero_offset(const void *buf, size_t len) · line 202
Quoted 5 lines
util/cutils.c +2
-0+ } +/* * Use long as the biggest available internal data type that fits into the * CPU register and unroll the loop to smooth out the effect of memory
Quoted 3 lines
Your patch results in C99 declarations after statements; while we require C99, I'm not sure if qemu prefers to stick to the C89 style of declarations before statements.
See my comments to patch 7/9 regarding is_zero_page(). I will move the call to the vector optimized version after the variable definitions. The speed concern at that point was mainline to use it for zero page checking.
Peter
Quoted 5 lines
Signature · 3 lines
-- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
PATCH v2 4/9 bitops: use vector algorithm to optimize find_next_bit()
In reply to Peter Lieventhis patch adds the usage of buffer_find_nonzero_offset() to skip large areas of zeroes.
compared to loop unrolling presented in an earlier patch this adds another 50% performance benefit for skipping large areas of zeroes. loop unrolling alone added close to 100% speedup.
--- util/bitops.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-)
util/bitops.c +23 -3
@@ -42,10 +42,30 @@ unsigned long find_next_bit(const unsigned long *addr, unsigned long size, size -=BITS_PER_LONG ; result +=BITS_PER_LONG ; } -while (size & ~(BITS_PER_LONG -1 )) { -if ((tmp = *(p++))) { - goto found_middle; +while (size >=BITS_PER_LONG ) { +if ((tmp = *p)) { + goto found_middle; + } +if (((uintptr_t ) p) %sizeof (VECTYPE ) ==0 + && size >=BITS_PER_BYTE *sizeof (VECTYPE ) + *BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR ) { +unsigned long tmp2 = +buffer_find_nonzero_offset (p, ((size /BITS_PER_BYTE ) & + ~(BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR * +sizeof (VECTYPE ) -1 ))); + result += tmp2 *BITS_PER_BYTE ; + size -= tmp2 *BITS_PER_BYTE ; + p += tmp2 /sizeof (unsigned long ); +if (!size) { +return result; + } +if (tmp2) { +if ((tmp = *p)) { + goto found_middle; + } + } } + p++; result +=BITS_PER_LONG ; size -=BITS_PER_LONG ; }
Signature · 1 line
1.7.9.5
Re: [Qemu-devel] [PATCHv2 4/9] bitops: use vector algorithm to optimize find_next_bit()
Quoted 13 lines · Peter Lieven
this patch adds the usage of
buffer_find_nonzero_offset()to skip large areas of zeroes.compared to loop unrolling presented in an earlier patch this adds another 50% performance benefit for skipping large areas of zeroes. loop unrolling alone added close to 100% speedup.
Signed-off-by Peter Lieven <[email protected]>--- util/bitops.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-)
util/bitops.c unsigned long find_next_bit(const unsigned long *addr, unsigned long size, · line 51
Quoted 7 lines
util/bitops.c +7
-0+while (size >=BITS_PER_LONG ) { +if ((tmp = *p)) { + goto found_middle; + } +if (((uintptr_t ) p) %sizeof (VECTYPE ) ==0 + && size >=BITS_PER_BYTE *sizeof (VECTYPE ) + *BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR ) {
Another instance where a helper function to check for alignment would be nice. Except this time you have a BITS_PER_BYTE factor, so you would be calling something like buffer_can_use_vectors(buf, size / BITS_PER_BYTE)
util/bitops.c unsigned long find_next_bit(const unsigned long *addr, unsigned long size, · line 55
Quoted 4 lines
util/bitops.c +4
-0+unsigned long tmp2 = +buffer_find_nonzero_offset (p, ((size /BITS_PER_BYTE ) & + ~(BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR * +sizeof (VECTYPE ) -1 )));
Type mismatch - buffer_find_nonzero_offset returns size_t, which isn't necessarily the same size as unsigned long. I'm not sure if it can bite you.
util/bitops.c unsigned long find_next_bit(const unsigned long *addr, unsigned long size, · line 62
Quoted 7 lines
util/bitops.c +7
-0+ result += tmp2 *BITS_PER_BYTE ; + size -= tmp2 *BITS_PER_BYTE ; + p += tmp2 /sizeof (unsigned long ); +if (!size) { +return result; + } +if (tmp2) {
Do you really need this condition, or would it suffice to just 'continue;' the loop? Once buffer_find_nonzero_offset returns anything that leaves size as non-zero, we are guaranteed that the loop will goto found_middle without any further calls to buffer_find_nonzero_offset.
Quoted 10 lines
util/bitops.c +5
-0+if ((tmp = *p)) { + goto found_middle; + } + } } + p++; result +=BITS_PER_LONG ; size -=BITS_PER_LONG ; }
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Re: [Qemu-devel] [PATCHv2 4/9] bitops: use vector algorithm to optimize find_next_bit()
Am 19.03.2013 um 17:49 schrieb Eric Blake <[email protected]>:
Quoted 26 lines · Peter Lieven
Quoted 13 lines
this patch adds the usage of
buffer_find_nonzero_offset()to skip large areas of zeroes.compared to loop unrolling presented in an earlier patch this adds another 50% performance benefit for skipping large areas of zeroes. loop unrolling alone added close to 100% speedup.
Signed-off-by Peter Lieven <[email protected]>---
util/bitops.c| 26 +++++++++++++++++++++++---1 file changed, 23 insertions(+), 3 deletions(-)util/bitops.c unsigned long find_next_bit(const unsigned long *addr, unsigned long size, · line 51
Quoted 7 lines
util/bitops.c +7
-0+while (size >=BITS_PER_LONG ) { +if ((tmp = *p)) { + goto found_middle; + } +if (((uintptr_t ) p) %sizeof (VECTYPE ) ==0 + && size >=BITS_PER_BYTE *sizeof (VECTYPE ) + *BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR ) {Another instance where a helper function to check for alignment would be nice. Except this time you have a
BITS_PER_BYTEfactor, so you would be calling something likebuffer_can_use_vectors(buf, size / BITS_PER_BYTE)
Quoted 8 lines
util/bitops.c unsigned long find_next_bit(const unsigned long *addr, unsigned long size, · line 55
Quoted 4 lines
util/bitops.c +4
-0+unsigned long tmp2 = +buffer_find_nonzero_offset (p, ((size /BITS_PER_BYTE ) & + ~(BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR * +sizeof (VECTYPE ) -1 )));Type mismatch -
buffer_find_nonzero_offsetreturnssize_t, which isn't necessarily the same size as unsigned long. I'm not sure if it can bite you.
I will look into it.
Quoted 9 lines
util/bitops.c unsigned long find_next_bit(const unsigned long *addr, unsigned long size, · line 62
Quoted 8 lines
util/bitops.c +7
-0+ result += tmp2 *BITS_PER_BYTE ; + size -= tmp2 *BITS_PER_BYTE ; + p += tmp2 /sizeof (unsigned long ); +if (!size) { +return result; + } +if (tmp2) {
Quoted 4 lines
Do you really need this condition, or would it suffice to just 'continue;' the loop? Once
buffer_find_nonzero_offsetreturns anything that leaves size as non-zero, we are guaranteed that the loop will gotofound_middlewithout any further calls tobuffer_find_nonzero_offset.
Note in all cases. It will do if the nonzero content is in the first sizeof(unsigned long) bytes. If not, buffer_find_nonzero_offset() is called again. It will return 0 because in the first sizeof(VECTYPE)*BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR
bytes is a non-zero byte. To avoid this I placed this check.
Peter
Quoted 16 lines
Quoted 11 lines
util/bitops.c +5
-0+if ((tmp = *p)) { + goto found_middle; + } + } } + p++; result +=BITS_PER_LONG ; size -=BITS_PER_LONG ; }Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
PATCH v2 5/9 migration: search for zero instead of dup pages
In reply to Peter Lievenvirtually all dup pages are zero pages. remove
the speical is_dup_page() function and use the
optimized buffer_is_zero() function instead.
--- arch_init.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)
arch_init.c +1 -16
@@ -144,21 +144,6 @@ int qemu_read_default_config_files(bool userconfig)return 0 ; } -static int is_dup_page (uint8_t *page) -{ -VECTYPE *p = (VECTYPE *)page; -VECTYPE val =SPLAT (page); -int i; - -for (i =0 ; i <TARGET_PAGE_SIZE /sizeof (VECTYPE ); i++) { -if (!ALL_EQ (val, p[i])) { -return 0 ; - } - } - -return 1 ; -} -/* struct contains XBZRLE cache and a static page used by the compression */ static struct {
@@ -443,7 +428,7 @@ static int ram_save_block(QEMUFile *f, bool last_stage)/* In doubt sent page as normal */ bytes_sent =-1 ; -if (is_dup_page (p)) { +if (buffer_is_zero (p,TARGET_PAGE_SIZE )) { acct_info.dup_pages++; bytes_sent =save_block_hdr (f, block, offset, cont,RAM_SAVE_FLAG_COMPRESS );
Signature · 1 line
1.7.9.5
Re: [Qemu-devel] [PATCHv2 5/9] migration: search for zero instead of dup pages
Quoted 2 lines · Peter Lieven
virtually all dup pages are zero pages. remove
the speicalis_dup_page()function and use the
s/speical/special/
Quoted 6 lines
optimized
buffer_is_zero()function instead.Signed-off-by Peter Lieven <[email protected]>--- arch_init.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
PATCH v2 6/9 migration: add an indicator for bulk state of ram migration
In reply to Peter Lieventhe first round of ram transfer is special since all pages are dirty and thus all memory pages are transferred to the target. this patch adds a boolean variable to track this stage.
--- arch_init.c | 3 +++ 1 file changed, 3 insertions(+)
arch_init.c +3 -0
@@ -311,6 +311,7 @@ static ram_addr_t last_offset;static unsigned long *migration_bitmap;static uint64_t migration_dirty_pages;static uint32_t last_version; +static bool ram_bulk_stage; static inline ram_addr_t migration_bitmap_find_and_reset_dirty(MemoryRegion *mr,
@@ -418,6 +419,7 @@ static int ram_save_block(QEMUFile *f, bool last_stage)if (!block) { block =QTAILQ_FIRST (&ram_list.blocks); complete_round = true; + ram_bulk_stage = false; } }else {uint8_t *p;
@@ -521,6 +523,7 @@ static void reset_ram_globals(void) last_sent_block =NULL ; last_offset =0 ; last_version = ram_list.version; + ram_bulk_stage = true; }#define MAX_WAIT 50/* ms, half buffered_file limit */
Signature · 1 line
1.7.9.5
Re: [Qemu-devel] [PATCHv2 6/9] migration: add an indicator for bulk state of ram migration
Quoted 9 lines · Peter Lieven
the first round of ram transfer is special since all pages are dirty and thus all memory pages are transferred to the target. this patch adds a boolean variable to track this stage.
Signed-off-by Peter Lieven <[email protected]>--- arch_init.c | 3 +++ 1 file changed, 3 insertions(+)
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
PATCH v2 7/9 migration: do not sent zero pages in bulk stage
In reply to Peter Lievenduring bulk stage of ram migration if a page is a zero page do not send it at all.
the memory at the destination reads as zero anyway.
even if there is an madvise with QEMU_MADV_DONTNEED at the target upon receival of a zero page I have observed that the target starts swapping if the memory is overcommitted. it seems that the pages are dropped asynchronously.
--- arch_init.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
arch_init.c +5 -3
@@ -432,9 +432,11 @@ static int ram_save_block(QEMUFile *f, bool last_stage) bytes_sent =-1 ;if (buffer_is_zero (p,TARGET_PAGE_SIZE )) { acct_info.dup_pages++; - bytes_sent =save_block_hdr (f, block, offset, cont, -RAM_SAVE_FLAG_COMPRESS ); -qemu_put_byte (f, *p); +if (!ram_bulk_stage) { + bytes_sent =save_block_hdr (f, block, offset, cont, +RAM_SAVE_FLAG_COMPRESS ); +qemu_put_byte (f, *p); + } bytes_sent +=1 ; }else if (migrate_use_xbzrle ()) { current_addr = block->offset + offset;
Signature · 1 line
1.7.9.5
Re: [Qemu-devel] [PATCHv2 7/9] migration: do not sent zero pages in bulk stage
Quoted 6 lines · Peter Lieven
during bulk stage of ram migration if a page is a zero page do not send it at all.
the memory at the destination reads as zero anyway.even if there is an madvise with
QEMU_MADV_DONTNEEDat the target upon receival of a zero page I have observed
s/receival/receipt/
Quoted 10 lines
that the target starts swapping if the memory is overcommitted. it seems that the pages are dropped asynchronously.
Signed-off-by Peter Lieven <[email protected]>--- arch_init.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)+++
b/arch_init.c
arch_init.c static int ram_save_block(QEMUFile *f, bool last_stage) · line 438
Quoted 10 lines
arch_init.c +4
-3@@ -432,9 +432,11 @@ static int ram_save_block(QEMUFile *f, bool last_stage) bytes_sent =-1 ;if (buffer_is_zero (p,TARGET_PAGE_SIZE )) { acct_info.dup_pages++; - bytes_sent =save_block_hdr (f, block, offset, cont, -RAM_SAVE_FLAG_COMPRESS ); -qemu_put_byte (f, *p); +if (!ram_bulk_stage) { + bytes_sent =save_block_hdr (f, block, offset, cont, +RAM_SAVE_FLAG_COMPRESS ); +qemu_put_byte (f, *p);
Hmm, in patch 5/9, why not 'qemu_put_byte(f, 0)' instead of spending time dereferencing *p, since you already know the byte is 0?
arch_init.c static int ram_save_block(QEMUFile *f, bool last_stage) · line 440
Quoted 2 lines
arch_init.c +1
-0+ } bytes_sent +=1 ;
Your accounting is now off. This increments bytes_sent even when nothing was sent in the bulk phase. When touching this line, consider using ++ instead of += 1.
Quoted 3 lines
arch_init.c +0
-0}else if (migrate_use_xbzrle ()) { current_addr = block->offset + offset;
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Re: [Qemu-devel] [PATCHv2 7/9] migration: do not sent zero pages in bulk stage
Am 19.03.2013 um 18:36 schrieb Eric Blake <[email protected]>:
Quoted 18 lines · Peter Lieven
Quoted 6 lines
during bulk stage of ram migration if a page is a zero page do not send it at all.
the memory at the destination reads as zero anyway.even if there is an madvise with
QEMU_MADV_DONTNEEDat the target upon receival of a zero page I have observeds/receival/receipt/
Quoted 7 lines
that the target starts swapping if the memory is overcommitted. it seems that the pages are dropped asynchronously.
Signed-off-by Peter Lieven <[email protected]>---
arch_init.c| 8 +++++---1 file changed, 5 insertions(+), 3 deletions(-)
Quoted 15 lines
arch_init.c static int ram_save_block(QEMUFile *f, bool last_stage) · line 438
Quoted 12 lines
+++
b/arch_init.carch_init.c +4
-3@@ -432,9 +432,11 @@ static int ram_save_block(QEMUFile *f, bool last_stage) bytes_sent =-1 ;if (buffer_is_zero (p,TARGET_PAGE_SIZE )) { acct_info.dup_pages++; - bytes_sent =save_block_hdr (f, block, offset, cont, -RAM_SAVE_FLAG_COMPRESS ); -qemu_put_byte (f, *p); +if (!ram_bulk_stage) { + bytes_sent =save_block_hdr (f, block, offset, cont, +RAM_SAVE_FLAG_COMPRESS ); +qemu_put_byte (f, *p);Hmm, in patch 5/9, why not '
qemu_put_byte(f, 0)' instead of spending time dereferencing *p, since you already know the byte is 0?
Good idea. Actually to avoid unnecessary checks in buffer_is_zero I think I would like to change "if (buffer_is_zero(p, TARGET_PAGE_SIZE)) {..} " to
bool inline is_zero_page(uint8_t *p) {return buffer_find_nonzero_offset(p, TARGET_PAGE_SIZE) == TARGET_PAGE_SIZE);}
...
if (is_zero_page(p)) {
…
}
also for better readability. For pages we know that they satisfy can_use_buffer_find_nonzero_offset().
Peter
Quoted 16 lines
arch_init.c static int ram_save_block(QEMUFile *f, bool last_stage) · line 440
Quoted 3 lines
arch_init.c +1
-0+ } bytes_sent +=1 ;Your accounting is now off. This increments
bytes_senteven when nothing was sent in the bulk phase. When touching this line, consider using ++ instead of += 1.Quoted 3 lines
arch_init.c +0
-0}else if (migrate_use_xbzrle ()) { current_addr = block->offset + offset;Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
PATCH v2 8/9 migration: do not search dirty pages in bulk stage
In reply to Peter Lievenavoid searching for dirty pages just increment the page offset. all pages are dirty anyway.
--- arch_init.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
arch_init.c +9 -3
@@ -321,8 +321,14 @@ ram_addr_t migration_bitmap_find_and_reset_dirty(MemoryRegion *mr,unsigned long nr = base + (start >>TARGET_PAGE_BITS );unsigned long size = base + (int128_get64 (mr->size) >>TARGET_PAGE_BITS ); -unsigned long next =find_next_bit (migration_bitmap, size, nr); - +unsigned long next; + +if (ram_bulk_stage) { + next = nr +1 ; + }else { + next =find_next_bit (migration_bitmap, size, nr); + } +if (next < size) {clear_bit (next, migration_bitmap); migration_dirty_pages--;
@@ -523,7 +529,7 @@ static void reset_ram_globals(void) { last_seen_block =NULL ; last_sent_block =NULL ; - last_offset =0 ; + last_offset =-1 ; last_version = ram_list.version; ram_bulk_stage = true; }
Signature · 1 line
1.7.9.5
Re: [Qemu-devel] [PATCHv2 8/9] migration: do not search dirty pages in bulk stage
Quoted 16 lines · Peter Lieven
avoid searching for dirty pages just increment the page offset. all pages are dirty anyway.
Signed-off-by Peter Lieven <[email protected]>--- arch_init.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)arch_init.c +0
-0@@ -321,8 +321,14 @@ ram_addr_t migration_bitmap_find_and_reset_dirty(MemoryRegion *mr,unsigned long nr = base + (start >>TARGET_PAGE_BITS );unsigned long size = base + (int128_get64 (mr->size) >>TARGET_PAGE_BITS );
arch_init.c ram_addr_t migration_bitmap_find_and_reset_dirty(MemoryRegion *mr, · line 330
Quoted 10 lines
arch_init.c +7
-2-unsigned long next =find_next_bit (migration_bitmap, size, nr); - +unsigned long next; + +if (ram_bulk_stage) { + next = nr +1 ; + }else { + next =find_next_bit (migration_bitmap, size, nr); + }
This part makes sense.
arch_init.c static void reset_ram_globals(void) · line 532
Quoted 10 lines
arch_init.c +2
-1+if (next < size) {clear_bit (next, migration_bitmap); migration_dirty_pages--;@@ -523,7 +529,7 @@ static void reset_ram_globals(void) { last_seen_block =NULL ; last_sent_block =NULL ; - last_offset =0 ; + last_offset =-1 ;
But what is this change doing? I don't see it mentioned in the commit message. Does it belong to a different commit?
Quoted 4 lines
arch_init.c +0
-0last_version = ram_list.version; ram_bulk_stage = true; }
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Re: [Qemu-devel] [PATCHv2 8/9] migration: do not search dirty pages in bulk stage
Am 19.03.2013 um 18:40 schrieb Eric Blake <[email protected]>:
Quoted 30 lines · Peter Lieven
Quoted 16 lines
avoid searching for dirty pages just increment the page offset. all pages are dirty anyway.
Signed-off-by Peter Lieven <[email protected]>---
arch_init.c| 12 +++++++++---1 file changed, 9 insertions(+), 3 deletions(-)arch_init.c +0
-0@@ -321,8 +321,14 @@ ram_addr_t migration_bitmap_find_and_reset_dirty(MemoryRegion *mr,unsigned long nr = base + (start >>TARGET_PAGE_BITS );unsigned long size = base + (int128_get64 (mr->size) >>TARGET_PAGE_BITS );arch_init.c ram_addr_t migration_bitmap_find_and_reset_dirty(MemoryRegion *mr, · line 330
Quoted 10 lines
arch_init.c +7
-2-unsigned long next =find_next_bit (migration_bitmap, size, nr); - +unsigned long next; + +if (ram_bulk_stage) { + next = nr +1 ; + }else { + next =find_next_bit (migration_bitmap, size, nr); + }This part makes sense.
Quoted 13 lines
arch_init.c static void reset_ram_globals(void) · line 532
Quoted 10 lines
arch_init.c +2
-1+if (next < size) {clear_bit (next, migration_bitmap); migration_dirty_pages--;@@ -523,7 +529,7 @@ static void reset_ram_globals(void) { last_seen_block =NULL ; last_sent_block =NULL ; - last_offset =0 ; + last_offset =-1 ;But what is this change doing? I don't see it mentioned in the commit message. Does it belong to a different commit?
Sorry, i forgot to comment this. If in bulk stage next is nr + 1. I was aiming
to have next = 0 with last_offset = -1, but actually I think I'm wrong here,
I missed the (start >> TARGET_PAGE_BITS) at the beginning of migration_bitmap_find_and_reset_dirty. If last_offset is initialized with 0. next is set to 1.
Peter
Quoted 10 lines
Quoted 5 lines
arch_init.c +0
-0last_version = ram_list.version; ram_bulk_stage = true; }Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
PATCH v2 9/9 migration: use XBZRLE only after bulk stage
In reply to Peter Lievenat the beginning of migration all pages are marked dirty and in the first round a bulk migration of all pages is performed.
currently all these pages are copied to the page cache regardless if there are frequently updated or not. this doesn't make sense since most of these pages are never transferred again.
this patch changes the XBZRLE transfer to only be used after the bulk stage has been completed. that means a page is added to the page cache the second time it is transferred and XBZRLE can benefit from the third time of transfer.
since the page cache is likely smaller than the number of pages its also likely that in the second round the page is missing in the cache due to collisions in the bulk phase.
on the other hand a lot of unneccssary mallocs, memdups and frees are saved.
the following results have been taken earlier while executing the test program from docs/xbzrle.txt. (+) with the patch and (-) without. (thanks to Eric Blake for reformatting and comments)
+ total time: 22185 milliseconds
- total time: 22410 milliseconds
Shaved 0.3 seconds, better than 1%!
+ downtime: 29 milliseconds
- downtime: 21 milliseconds
Not sure why downtime seemed worse, but probably not the end of the world.
+ transferred ram: 706034 kbytes
- transferred ram: 721318 kbytes
Fewer bytes sent - good.
+ remaining ram: 0 kbytes
- remaining ram: 0 kbytes
+ total ram: 1057216 kbytes
- total ram: 1057216 kbytes
+ duplicate: 108556 pages
- duplicate: 105553 pages
+ normal: 175146 pages
- normal: 179589 pages
+ normal bytes: 700584 kbytes
- normal bytes: 718356 kbytes
Fewer normal bytes...
+ cache size: 67108864 bytes
- cache size: 67108864 bytes
+ xbzrle transferred: 3127 kbytes
- xbzrle transferred: 630 kbytes
...and more compressed pages sent - good.
+ xbzrle pages: 117811 pages
- xbzrle pages: 21527 pages
+ xbzrle cache miss: 18750
- xbzrle cache miss: 179589
And very good improvement on the cache miss rate.
+ xbzrle overflow : 0
- xbzrle overflow : 0
--- arch_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch_init.c +1 -1
@@ -444,7 +444,7 @@ static int ram_save_block(QEMUFile *f, bool last_stage)qemu_put_byte (f, *p); } bytes_sent +=1 ; - }else if (migrate_use_xbzrle ()) { + }else if (!ram_bulk_stage &&migrate_use_xbzrle ()) { current_addr = block->offset + offset; bytes_sent =save_xbzrle_page (f, p, current_addr, block, offset, cont, last_stage);
Signature · 1 line
1.7.9.5
Re: [Qemu-devel] [PATCHv2 9/9] migration: use XBZRLE only after bulk stage
Quoted 12 lines · Peter Lieven
at the beginning of migration all pages are marked dirty and in the first round a bulk migration of all pages is performed.
currently all these pages are copied to the page cache regardless if there are frequently updated or not. this doesn't make sense since most of these pages are never transferred again.
this patch changes the XBZRLE transfer to only be used after the bulk stage has been completed. that means a page is added to the page cache the second time it is transferred and XBZRLE can benefit from the third time of transfer.
Quoted 5 lines
since the page cache is likely smaller than the number of pages its also likely that in the second round the page is missing in the cache due to collisions in the bulk phase.
on the other hand a lot of unneccssary mallocs, memdups and frees
s/unneccssary/unnecessary/
Quoted 5 lines
are saved.
the following results have been taken earlier while executing the test program from
docs/xbzrle.txt. (+) with the patch and (-) without. (thanks to Eric Blake for reformatting and comments)
Hey - I know that guy :)
Quoted 43 lines
+ total time: 22185 milliseconds
- total time: 22410 millisecondsShaved 0.3 seconds, better than 1%!
+ downtime: 29 milliseconds
- downtime: 21 millisecondsNot sure why downtime seemed worse, but probably not the end of the world.
+ transferred ram: 706034 kbytes
- transferred ram: 721318 kbytesFewer bytes sent - good.
+ remaining ram: 0 kbytes
- remaining ram: 0 kbytes
+ total ram: 1057216 kbytes
- total ram: 1057216 kbytes
+ duplicate: 108556 pages
- duplicate: 105553 pages
+ normal: 175146 pages
- normal: 179589 pages
+ normal bytes: 700584 kbytes
- normal bytes: 718356 kbytesFewer normal bytes...
+ cache size: 67108864 bytes
- cache size: 67108864 bytes
+ xbzrle transferred: 3127 kbytes
- xbzrle transferred: 630 kbytes...and more compressed pages sent - good.
+ xbzrle pages: 117811 pages
- xbzrle pages: 21527 pages
+ xbzrle cache miss: 18750
- xbzrle cache miss: 179589And very good improvement on the cache miss rate.
Quoted 7 lines
+ xbzrle overflow : 0
- xbzrle overflow : 0Signed-off-by Peter Lieven <[email protected]>--- arch_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org