Skip to contentSkip to conversation

irqchip: vt8500: Properly mask the interrupt in irq_mask()

PATCH Superseded Axel Lin 1 participant 1 message Apr 28, 2014 irqchip drivers

lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 irqchip: vt8500: Properly mask the interrupt in irq_mask()

Current code sets both irq_ack and irq_mask callbacks to vt8500_irq_mask(). However, vt8500_irq_mask does not clear interrupt enable bit when the interrupt trigger mode is edge trigger.

This patch moves the code clearing Interrupt Status Register bit to irq_ack(). Make irq_mask() always clear interrupt enable bit for all interrupt trigger mode.

According to the datasheet, the Interrupt Status Register is written one to clear(Write 0 has no effect). So we don't need a read-modify-write operation for clearing a bit in interrupt status register.

Signed-off-by Axel Lin <[email protected]>
---
 drivers/irqchip/irq-vt8500.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)
drivers/irqchip/irq-vt8500.c +15 -16
index d970595..eb6d05a 100644
@@ -81,25 +81,24 @@ struct vt8500_irq_data {
 static struct vt8500_irq_data intc[VT8500_INTC_MAX];
 static u32 active_cnt = 0;
 
-static void vt8500_irq_mask(struct irq_data *d)
+static void vt8500_irq_ack(struct irq_data *d)
 {
 	struct vt8500_irq_data *priv = d->domain->host_data;
 	void __iomem *base = priv->base;
 	void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4);
-	u8 edge, dctr;
-	u32 status;
-
-	edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
-	if (edge) {
-		status = readl(stat_reg);
-
-		status |= (1 << (d->hwirq & 0x1f));
-		writel(status, stat_reg);
-	} else {
-		dctr = readb(base + VT8500_ICDC + d->hwirq);
-		dctr &= ~VT8500_INT_ENABLE;
-		writeb(dctr, base + VT8500_ICDC + d->hwirq);
-	}
+
+	writel(1 << (d->hwirq & 0x1f), stat_reg);
+}
+
+static void vt8500_irq_mask(struct irq_data *d)
+{
+	struct vt8500_irq_data *priv = d->domain->host_data;
+	void __iomem *base = priv->base;
+	u8 dctr;
+
+	dctr = readb(base + VT8500_ICDC + d->hwirq);
+	dctr &= ~VT8500_INT_ENABLE;
+	writeb(dctr, base + VT8500_ICDC + d->hwirq);
 }
 
 static void vt8500_irq_unmask(struct irq_data *d)

@@ -145,7 +144,7 @@ static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 
 static struct irq_chip vt8500_irq_chip = {
 	.name = "vt8500",
-	.irq_ack = vt8500_irq_mask,
+	.irq_ack = vt8500_irq_ack,
 	.irq_mask = vt8500_irq_mask,
 	.irq_unmask = vt8500_irq_unmask,
 	.irq_set_type = vt8500_irq_set_type,
Signature · 1 line
1.8.1.2